New Hub: WA: TVTUL-CANCELED
- Fluffshery
- Rainbow Seeker
- Posts: 277
- Joined: Fri Jun 26, 2009 1:28 am
New Hub: WA: TVTUL-CANCELED
I am making a hub called Wonderland Adventures: The Voyage to Unknown Locations. Comments Plz.
This has been canceled because I lost all of it when my hard drive was wrecked.
Plot: You start out with no clear purpose, but pretty soon you see Morklin, and houses start exploding. You go over to investigate the cause when a giant angry shadow stinker appears. Morklin tells you to head out on a ship, looking for an ancient race of stinkers he's heard about. Then he gets kidnapped by the angry shadow giant. You leave on a ship like Morklin told you, and stop at KABOOM! Lagoon, to pick up some KABOOM! friends and help them out a little. Then you head of to find the stinkers Morklin told you about.
The rest, well... you'll have to find out.
Also I have a problem. When I go to the level (in the hub) where the houses explode, the screen goes black and says: "Could not load Data/Models/Stinker/accessory102c". The only stinkers there are Morklin, and the giant shadow one. Please tell me what I'm doing wrong or how to fix this.
This has been canceled because I lost all of it when my hard drive was wrecked.
Plot: You start out with no clear purpose, but pretty soon you see Morklin, and houses start exploding. You go over to investigate the cause when a giant angry shadow stinker appears. Morklin tells you to head out on a ship, looking for an ancient race of stinkers he's heard about. Then he gets kidnapped by the angry shadow giant. You leave on a ship like Morklin told you, and stop at KABOOM! Lagoon, to pick up some KABOOM! friends and help them out a little. Then you head of to find the stinkers Morklin told you about.
The rest, well... you'll have to find out.
Also I have a problem. When I go to the level (in the hub) where the houses explode, the screen goes black and says: "Could not load Data/Models/Stinker/accessory102c". The only stinkers there are Morklin, and the giant shadow one. Please tell me what I'm doing wrong or how to fix this.
You do not have the required permissions to view the files attached to this post.
Last edited by Fluffshery on Sun Sep 16, 2012 11:45 pm, edited 9 times in total.
My Level ListAlbert Einstein wrote:Anyone who has never made a mistake has never tried anything new.
um...COuld you plz make some adv.s before starting a hub, just to know if you have a great ability of level designing, as for the accesory, Copy from MOFI the Models file, which is found in MOFI/DAta/
LEVEL LIS1
The Hidd3n Archive, Part Four: [36%, In Progress]
The Hidden 4rchive, Part Three (Redeemer's Edition)
The Apocollab [0%, Confirmed, Planning]
Are Cookie and Ash Gay? [Cancelled]
The Hidd3n Archive, Part Four: [36%, In Progress]
The Hidden 4rchive, Part Three (Redeemer's Edition)
The Apocollab [0%, Confirmed, Planning]
Are Cookie and Ash Gay? [Cancelled]
- Master Wonder Mage
- Rainbow SuperStar
- Posts: 2124
- Joined: Sat Jan 08, 2011 5:26 pm
- Fluffshery
- Rainbow Seeker
- Posts: 277
- Joined: Fri Jun 26, 2009 1:28 am
Hubs are easier for me and I like them better. Anyways, I have 2 pictures. And thanks for the tips on the accessory problem. It's still not quite fixed, but I'll figure it out.
Now for Pictures!
Now for Pictures!
You do not have the required permissions to view the files attached to this post.
Last edited by Fluffshery on Thu Nov 17, 2011 3:26 am, edited 1 time in total.
- Fluffshery
- Rainbow Seeker
- Posts: 277
- Joined: Fri Jun 26, 2009 1:28 am
I have some pictures and a question. How do you convert??? I've tried and it isn't working. I'm using Jafo's editor tools. Pics.
You do not have the required permissions to view the files attached to this post.
My Level ListAlbert Einstein wrote:Anyone who has never made a mistake has never tried anything new.
- Fluffshery
- Rainbow Seeker
- Posts: 277
- Joined: Fri Jun 26, 2009 1:28 am
(TP)
Demo:
Progress:
Levels (In Hub): 9/10+
Adventures: 15 1/2 /30+
Textures: 0/?
Overall: 24 1/2?
Full Version:
Progress:
Levels (In Hub): 9/?
Adventures: 15 1/2 /?
Textures: 0/?
Overall: 24 1/2?
And please help on the converting question.
Also, the beach texture isn't loading. I tried it as a custom texture, I tried it as a regularly selected texture, and I don't know how else to try it. (It changes back to the hills tex.)
25th Post!
Demo:
Progress:
Levels (In Hub): 9/10+
Adventures: 15 1/2 /30+
Textures: 0/?
Overall: 24 1/2?
Full Version:
Progress:
Levels (In Hub): 9/?
Adventures: 15 1/2 /?
Textures: 0/?
Overall: 24 1/2?
And please help on the converting question.
Also, the beach texture isn't loading. I tried it as a custom texture, I tried it as a regularly selected texture, and I don't know how else to try it. (It changes back to the hills tex.)
25th Post!
Last edited by Fluffshery on Thu Dec 15, 2011 2:52 am, edited 1 time in total.
My Level ListAlbert Einstein wrote:Anyone who has never made a mistake has never tried anything new.
- Fluffshery
- Rainbow Seeker
- Posts: 277
- Joined: Fri Jun 26, 2009 1:28 am
Nobody (not the forum member, the generic term.) really seems to actually care much about this hub, so I'm going to work on it less often. I still will work on it, but just not as my main project.
My Level ListAlbert Einstein wrote:Anyone who has never made a mistake has never tried anything new.
To convert a level with the editor tools:
Select a level to convert. You can either type in the whole path, or hit the browse button and select it from the OpenFile dialog window.
Select the directory where you want the converted file to be saved. Do not pick the same directory as the original file, or it will be overwritten, and you won't be able to edit the file anymore. You can select a directory by either typing it in, or using the Browse button and selecting one from the SelectFolder dialog window.
Once the source file and the destination directory are selected, hit the Convert button. A message should show up telling you it was converted.
If your problem is getting the program to run, remember that this requires the .NET framework 4.0 (the download installer was included with the Editor Tools). Also, if you're running Windows XP, you might also need to install the Windows Imaging Component (WIC) before you install the .NET framework. You can find the WIC by googling it.
Sorry for the late response, I don't browse the forum that much these days. If you have further questions about Editor Tools, post them in the Editor Tools topic, that way I'll be sure to see them.
Select a level to convert. You can either type in the whole path, or hit the browse button and select it from the OpenFile dialog window.
Select the directory where you want the converted file to be saved. Do not pick the same directory as the original file, or it will be overwritten, and you won't be able to edit the file anymore. You can select a directory by either typing it in, or using the Browse button and selecting one from the SelectFolder dialog window.
Once the source file and the destination directory are selected, hit the Convert button. A message should show up telling you it was converted.
If your problem is getting the program to run, remember that this requires the .NET framework 4.0 (the download installer was included with the Editor Tools). Also, if you're running Windows XP, you might also need to install the Windows Imaging Component (WIC) before you install the .NET framework. You can find the WIC by googling it.
Sorry for the late response, I don't browse the forum that much these days. If you have further questions about Editor Tools, post them in the Editor Tools topic, that way I'll be sure to see them.
- Master Wonder Mage
- Rainbow SuperStar
- Posts: 2124
- Joined: Sat Jan 08, 2011 5:26 pm
Due to the large number of cancelled and abandoned hubs lately, no one is going to pay much attention to it until the demo release.Fluffshery wrote:Nobody (not the forum member, the generic term.) really seems to actually care much about this hub, so I'm going to work on it less often. I still will work on it, but just not as my main project.
- Fluffshery
- Rainbow Seeker
- Posts: 277
- Joined: Fri Jun 26, 2009 1:28 am
I suppose that's true, I'll try and finish the demo quickly then.Master Wonder Mage wrote:Due to the large number of cancelled and abandoned hubs lately, no one is going to pay much attention to it until the demo release.Fluffshery wrote:Nobody (not the forum member, the generic term.) really seems to actually care much about this hub, so I'm going to work on it less often. I still will work on it, but just not as my main project.
@Jafo: My problem is that when I convert a level, once it begins converting, the program stops responding. It still makes a copy of the adventure in the choosen location, but it hasn't converted it. (I'll repost this in the Editor Tools topic)
EDIT: Well, the Editor Tools are on the 3rd or 4th page, do that would be a bad "BUMP", right? So I'm just going to leave this here.
My Level ListAlbert Einstein wrote:Anyone who has never made a mistake has never tried anything new.
-
- Rainbow AllStar
- Posts: 4548
- Joined: Fri Dec 26, 2008 4:56 pm
- Fluffshery
- Rainbow Seeker
- Posts: 277
- Joined: Fri Jun 26, 2009 1:28 am
Until I get the converting problem fixed, this hub will be on pause. I still plan to resume it when it works or when POTZ comes out (It will eventually). Just figured I'd let you know.
My Level ListAlbert Einstein wrote:Anyone who has never made a mistake has never tried anything new.
use the editor tools, add the level you want to convert, or adventure, select the directory output, make sure it's diff. than the input directory, press convert, when complete, take your level that you converted and put it in your Adventure# file, (# is the no. that you want), If it didn't work, gimme the level, and Tom. I'll give it back to you.Fluffshery wrote:Until I get the converting problem fixed, this hub will be on pause. I still plan to resume it when it works or when POTZ comes out (It will eventually). Just figured I'd let you know.
LEVEL LIS1
The Hidd3n Archive, Part Four: [36%, In Progress]
The Hidden 4rchive, Part Three (Redeemer's Edition)
The Apocollab [0%, Confirmed, Planning]
Are Cookie and Ash Gay? [Cancelled]
The Hidd3n Archive, Part Four: [36%, In Progress]
The Hidden 4rchive, Part Three (Redeemer's Edition)
The Apocollab [0%, Confirmed, Planning]
Are Cookie and Ash Gay? [Cancelled]
- Fluffshery
- Rainbow Seeker
- Posts: 277
- Joined: Fri Jun 26, 2009 1:28 am
What's Tom? I actually am going to restart because I had a new idea on part of this that didn't work. And better to restart earlier than later. And now I can actually put MOFI objects in. I even have a way to work Indigo Magic in if I restart.
My Level ListAlbert Einstein wrote:Anyone who has never made a mistake has never tried anything new.
how stoopid of Me, I meant Tom. by tomorrow, I'm just lazy.Fluffshery wrote:What's Tom? I actually am going to restart because I had a new idea on part of this that didn't work. And better to restart earlier than later. And now I can actually put MOFI objects in. I even have a way to work Indigo Magic in if I restart.
plus
Indigo magic will be useless, I don't what will you do to it, but fine.
LEVEL LIS1
The Hidd3n Archive, Part Four: [36%, In Progress]
The Hidden 4rchive, Part Three (Redeemer's Edition)
The Apocollab [0%, Confirmed, Planning]
Are Cookie and Ash Gay? [Cancelled]
The Hidd3n Archive, Part Four: [36%, In Progress]
The Hidden 4rchive, Part Three (Redeemer's Edition)
The Apocollab [0%, Confirmed, Planning]
Are Cookie and Ash Gay? [Cancelled]
- Dark Drago
- Rainbow Master
- Posts: 919
- Joined: Mon Apr 09, 2012 7:50 am
- StinkerSquad01
- Rainbow AllStar
- Posts: 4250
- Joined: Mon Aug 09, 2010 3:39 am
- Fluffshery
- Rainbow Seeker
- Posts: 277
- Joined: Fri Jun 26, 2009 1:28 am
I've been having problems with the MoFI objects, so I haven't been working on this.Dark Drago wrote:What's up? No progress?
My Level ListAlbert Einstein wrote:Anyone who has never made a mistake has never tried anything new.