Cool! What did you change and where?Qloof234 wrote:
Well, ignoring the incorrect rotation on the top-right one, this confirms that it's possible to switch the model name for anyone proficient enough with a Hex editor.
This also confirms that suction tubes look kind of... weird when they aren't using the Z-Bot gates.
[RELEASE] WA3 Editor Tools Conversion Files (UPDATE DEC. 02)
- Fluffshery
- Rainbow Seeker
- Posts: 277
- Joined: Fri Jun 26, 2009 1:28 am
My Level ListAlbert Einstein wrote:Anyone who has never made a mistake has never tried anything new.
- LexieTheFox
- Rainbow Master
- Posts: 769
- Joined: Mon Sep 27, 2010 11:51 pm
Volume: 10Krishiv738 wrote:Dd you set the volume or remained it 0?LexieTheFox wrote:Armed with that knowledge, does anyone know (I know, it's relatively new. I'm trying myself to find this out, but just incase)
Does anyone know what to set Stars End to with Cmd 12 to make it slow down to a shocking like aspect? I'm using it for something that happens at the Mythical Summit. But when I fired the cmd all it did was "erase" the music entirely.
Speed: 5, then changed to 3.
Wooh, suction tube corners!
Rawr.
Fear me, I bite! >:3
Fear me, I bite! >:3
It'll make some PoTZ levels incompatible with the Player, and I'd recommend making a backup of wg.exe in case something goes wrong.Fluffshery wrote:Cool! What did you change and where?
You'll need a HEX editor, by the way. It's quite straightforward - In the wg.exe file, there's a collection of shorthand model names (!FlipBridge, !Suctube, !WaterFall, etc.). In there, you should find the following pattern (note that you can't copy-paste this into the search function, it won't work - just search for !SuctubeX):
Code: Select all
!FloingBubble !Spring !Suctube !SuctubeX !FlipBridge !WaterFall !Star
Data values for Tube Corners:
As this change requires editing the game's .exe file, I'm not going to add it to the main package. Instead, I'll put a link to this post in the first one, for people to check if they're interested.Data2 - Direction (which ends of tube are open): 0 - down/right, 1 - down/left, 2 - up/left, 3 - up/right
Data3 - Skin (uses same values as the regular suction tube)
YawAdjust (MUST BE SET SEPARATELY FOR MODEL TO FACE CORRECT DIRECTION): 0.0 - down/right, 270.0 - down-left, 180.0 - up/left, 90.0 - up/right
You do not have the required permissions to view the files attached to this post.
- Fluffshery
- Rainbow Seeker
- Posts: 277
- Joined: Fri Jun 26, 2009 1:28 am
Yes! I got it to work! Thank you!
My Level ListAlbert Einstein wrote:Anyone who has never made a mistake has never tried anything new.
- Krishiv738
- Rainbow Keeper
- Posts: 340
- Joined: Mon Jul 22, 2013 9:47 am
Volume 10 makes very little sound so make it above.volume doesn't increase it but it adjusts it.Normal music has volume of 50 which is okay.LexieTheFox wrote:Volume: 10Krishiv738 wrote:Dd you set the volume or remained it 0?LexieTheFox wrote:Armed with that knowledge, does anyone know (I know, it's relatively new. I'm trying myself to find this out, but just incase)
Does anyone know what to set Stars End to with Cmd 12 to make it slow down to a shocking like aspect? I'm using it for something that happens at the Mythical Summit. But when I fired the cmd all it did was "erase" the music entirely.
Speed: 5, then changed to 3.
Wooh, suction tube corners!
50+ volume is higher volume and
50- is lower volume.
This applies to speed also.
This command needs tens place.
I am getting outta here, nothing is new, everything is boring.
- Krishiv738
- Rainbow Keeper
- Posts: 340
- Joined: Mon Jul 22, 2013 9:47 am
update the wop notes again because
the cmd 12
data1: volume (50 is default)
data2: ???
data3: speed (50 is default)
data4: ???
zap bot
data1:direction
data4:follow path
oops ,found out this
that's a floing bubble model in logic of static
model:!FloingBubble
also this
that's the rainbow portal without frame
model:!Portal Warp
this too
that's a mofi map,a model not a pic from Generic Square
model:!SkyMachineMap
the cmd 12
data1: volume (50 is default)
data2: ???
data3: speed (50 is default)
data4: ???
zap bot
data1:direction
data4:follow path
oops ,found out this
that's a floing bubble model in logic of static
model:!FloingBubble
also this
that's the rainbow portal without frame
model:!Portal Warp
this too
that's a mofi map,a model not a pic from Generic Square
model:!SkyMachineMap
I am getting outta here, nothing is new, everything is boring.
- Krishiv738
- Rainbow Keeper
- Posts: 340
- Joined: Mon Jul 22, 2013 9:47 am
i found that the glowworms that have z-bot like paths(goes straight and when it hits a different texture floor or wall, it turns in any direction) are called Zippers.
model:!Zipper
also the star summit is at 37.wlv
I found that NPC Stars have data1 which changes the skin.
Zipper HERe
model:!Zipper
also the star summit is at 37.wlv
I found that NPC Stars have data1 which changes the skin.
Zipper HERe
You do not have the required permissions to view the files attached to this post.
I am getting outta here, nothing is new, everything is boring.
- Blazeknight
- Rainbow Master
- Posts: 797
- Joined: Sun Nov 04, 2012 5:50 am
- Krishiv738
- Rainbow Keeper
- Posts: 340
- Joined: Mon Jul 22, 2013 9:47 am
Rainbow portal has two parts,Blazeknight wrote:How do I get the rainbow portal to work? Is it from a suction tube leading to an arrow or a separate wop?
Entrance(Frame):behaves like suction tube with no particles.
Warp:it doesn't behave like suction tube but when player is flying through it,it just changes the level,also it has different logic.(see my warp picture above)
Also entrance and the warp has different wops not same wops,the picture I posted has logic of none.
I am getting outta here, nothing is new, everything is boring.
- Blazeknight
- Rainbow Master
- Posts: 797
- Joined: Sun Nov 04, 2012 5:50 am
- Krishiv738
- Rainbow Keeper
- Posts: 340
- Joined: Mon Jul 22, 2013 9:47 am
I don't know logic of warp(rainbow circular tube)but I know the model:!Portal Warp.i don't know model and logic of blue arch,I will try finding the wlv around 37.wlv in POTZ hub.37.wlv is star summit.Blazeknight wrote:Can I get a wop of it... I think I haven't found one in the potz wop folders or a convertable swap form of a level exit? Or to put it simpler, can someone tell me how to get that blue arch and the rainbow semicircular tube in a potz player wlv?
I am getting outta here, nothing is new, everything is boring.
- jdl
- Rainbow SuperStar
- Posts: 2889
- Joined: Fri Jun 06, 2008 8:37 pm
- Location: West Virginia, USA
- Contact:
For anyone who is good at converting PotZ levels to load in the editor, Hub level 4.wlv seems to have a General Command button by the bridge that when stepped on plays a "Resistance is futile!" sound clip. So it seems that there is a command to play sounds.
I can't seem to convert the level correctly so if you have any success please post the command here!
I can't seem to convert the level correctly so if you have any success please post the command here!
Sure, I'll take a look. It's probably not converting correctly because of the Suction Tube corners.
Also, are you using the MoFI model-hacked editor? It has a few of the Computers from MoFI in there, so it'll MAV the regular editor.
EDIT: Wait, no, I found out what's causing the crash.
There's a sign in the level that uses the "Z-Bot Sign" model, which the conversion tools don't support.
Also, are you using the MoFI model-hacked editor? It has a few of the Computers from MoFI in there, so it'll MAV the regular editor.
EDIT: Wait, no, I found out what's causing the crash.
There's a sign in the level that uses the "Z-Bot Sign" model, which the conversion tools don't support.
AutoDoor data values found!
These were tested for almost 2 hours and seem to be guessed right.
Data4: ActivateID
Data5: ActivateID
Data6: ActivateID
Data7: TimerMaxL
ActivateID is tricky:
set to 0 passes everything,
set to 1 and higher passes an object with specified ID,
set to -1 passes the player,
set to -2 and lower passes all objects with logic equal to the negative of given number (for -2 it passes all objects with logic equal to 2, for -430 it passes all objects with logic of 430, which is ZipBot logic). This means 1 is logic number of the player and that's why any object with logic of 1 MAVs upon sight - the engine doesn't know how to deal with more than one player object present in one .wlv, so it MAVs.
AcivateIDs may be different if you want few different objects to pass the AutoDoor. Order of ActivateIDs given makes no difference. Bear in mind that if you leave 0 in any of Data 4, 5 or 6 the AutoDoor will open for every object trying to pass it.
For example: an AutoDoor with Data4 set to -150, Data5 set to -1 and Data6 set to 4 will pass all the Scritters (logic 150), the player and all objects with ID set to 4.
TimerMaxL defines how long the AutoDoor remains open after the triggering object goes off its range of influence (which is 5x5 box around it, so the AutoDoor is in the middle).
Enjoy!
These were tested for almost 2 hours and seem to be guessed right.
Data4: ActivateID
Data5: ActivateID
Data6: ActivateID
Data7: TimerMaxL
ActivateID is tricky:
set to 0 passes everything,
set to 1 and higher passes an object with specified ID,
set to -1 passes the player,
set to -2 and lower passes all objects with logic equal to the negative of given number (for -2 it passes all objects with logic equal to 2, for -430 it passes all objects with logic of 430, which is ZipBot logic). This means 1 is logic number of the player and that's why any object with logic of 1 MAVs upon sight - the engine doesn't know how to deal with more than one player object present in one .wlv, so it MAVs.
AcivateIDs may be different if you want few different objects to pass the AutoDoor. Order of ActivateIDs given makes no difference. Bear in mind that if you leave 0 in any of Data 4, 5 or 6 the AutoDoor will open for every object trying to pass it.
For example: an AutoDoor with Data4 set to -150, Data5 set to -1 and Data6 set to 4 will pass all the Scritters (logic 150), the player and all objects with ID set to 4.
TimerMaxL defines how long the AutoDoor remains open after the triggering object goes off its range of influence (which is 5x5 box around it, so the AutoDoor is in the middle).
Enjoy!
"Let us return to the past; it will be progress."
by Giuseppe Verdi
by Giuseppe Verdi
- Krishiv738
- Rainbow Keeper
- Posts: 340
- Joined: Mon Jul 22, 2013 9:47 am
Now the shard sounds from the star summit can be played but there is there is so data which controls pitch or it might not exist in data.
I am going to create a test adventure with 150 CDMA,that's a lot of work.
Find a pattern via Cmd data and backwards(Z-A) sound folder,Acpu#.wdf will be last, there are also some extra sounds which are modified gem sounds.(pitched up,down sounds).[This is wrong]We also found how the makes 'Wakka' sound when picked up a gem in Wakka Wakka levels,which means Cmd 10 exists in WA trilogy(WA,MoFI,POTZ)[\ this is wrong]This is a brief note about Cmd 10(my posts are always long posts)
Edit:when I was playing POTZ,my player was at star summit,suddenly I tripped and fell from the chair and mouse pointer pointed at invisible wall,I just moved to mouse pointer to right and found fake walls starting from the invisible wall,My player just blinked through walled it and moved forward annnd *click* a floor button is pressed!I also heard chomper noises coming from right.Maybe they are activating some CMD.
Edit2:Indeed there is a pattern,resistance is futile is Acpu9.wav
And all your base belongs to us at Acpu8.wav
Also there are 10 sounds left,must be shard or gem sounds.
Edit3:it's a POTZ Cmd not in MoFI or WA
I am going to create a test adventure with 150 CDMA,that's a lot of work.
Find a pattern via Cmd data and backwards(Z-A) sound folder,Acpu#.wdf will be last, there are also some extra sounds which are modified gem sounds.(pitched up,down sounds).[This is wrong]We also found how the makes 'Wakka' sound when picked up a gem in Wakka Wakka levels,which means Cmd 10 exists in WA trilogy(WA,MoFI,POTZ)[\ this is wrong]This is a brief note about Cmd 10(my posts are always long posts)
Edit:when I was playing POTZ,my player was at star summit,suddenly I tripped and fell from the chair and mouse pointer pointed at invisible wall,I just moved to mouse pointer to right and found fake walls starting from the invisible wall,My player just blinked through walled it and moved forward annnd *click* a floor button is pressed!I also heard chomper noises coming from right.Maybe they are activating some CMD.
Edit2:Indeed there is a pattern,resistance is futile is Acpu9.wav
And all your base belongs to us at Acpu8.wav
Also there are 10 sounds left,must be shard or gem sounds.
Edit3:it's a POTZ Cmd not in MoFI or WA
I am getting outta here, nothing is new, everything is boring.
- Krishiv738
- Rainbow Keeper
- Posts: 340
- Joined: Mon Jul 22, 2013 9:47 am
List deleted,download whole lis t from qloof
Last edited by Krishiv738 on Sun Dec 15, 2013 7:39 am, edited 2 times in total.
I am getting outta here, nothing is new, everything is boring.
- Krishiv738
- Rainbow Keeper
- Posts: 340
- Joined: Mon Jul 22, 2013 9:47 am
- Krishiv738
- Rainbow Keeper
- Posts: 340
- Joined: Mon Jul 22, 2013 9:47 am
Plus, I think 144 is "I AM ERROR" and 145 is "Does not compute!" though, I do admit, this is purely by my ears.
And I think it's "Chicken! Fight like a z-bot!" like from what stinkersquad's signature was a little while ago.
And I think it's "Chicken! Fight like a z-bot!" like from what stinkersquad's signature was a little while ago.
Your only little stinker that's absolutely NOT a z-bot by this name,
Jutomi~
Also, if you want to see my level list, here it is!
(Also: List of Hubs, WA Manual)
Oh, and my YT wonderland channel. Forgot about that.
Jutomi~
Also, if you want to see my level list, here it is!
(Also: List of Hubs, WA Manual)
Oh, and my YT wonderland channel. Forgot about that.
- StinkerSquad01
- Rainbow AllStar
- Posts: 4250
- Joined: Mon Aug 09, 2010 3:39 am
- Krishiv738
- Rainbow Keeper
- Posts: 340
- Joined: Mon Jul 22, 2013 9:47 am