Evening stroll

bordeaux · Post by **bordeaux** » Sun Sep 11, 2005 7:19 pm

Enjoy!

Lillian · Post by **Lillian** » Mon Sep 12, 2005 10:17 pm

You are a STINKER!!!!!!

bordeaux · Post by **bordeaux** » Tue Sep 13, 2005 12:07 am

Did you solve it Lillian?

Lillian · Post by **Lillian** » Tue Sep 13, 2005 8:24 am

bordeaux wrote:Did you solve it Lillian?

Eeerrrrrrrrr.............. NO!

malcdelsol · Post by **malcdelsol** » Tue Sep 13, 2005 2:02 pm

Hi bordeaux,

It was recommended to me by Lillian to play this level

Of late I have not been posting much BUT, I just had to for this level, to say what an EXCELLENT challenge this was

It certainly made for a good couple of hours of fun

Pleased to say that I finally completetd it OK

Thanx,

Malcdelsol

bordeaux · Post by **bordeaux** » Tue Sep 13, 2005 2:48 pm

Thank you Malcdelsol! Your levels have always been challenging to me. But, I have to ask why you are not posting lately?

malcdelsol · Post by **malcdelsol** » Tue Sep 13, 2005 3:13 pm

Hi bordeaux,

Not posting lately as I am not playing many levels at the mo

Playing other games that for many a month I neglected whilst deep inside Wonderland

Will play more levels at a later date I expect

Malcdelsol

Loirae · Post by **Loirae** » Wed Sep 14, 2005 8:00 am

Is this another "feature" that I'm not familiar with (like cannons and fire, or barrels and generators)... I moved a reflector into position and the cannon flame hit hit but did not ricochet. Just dead-ended into it.

Of course, that probably means it's not set up right because if it were, you would've noticed when creating it, I'm sure. Meanwhile, I'm curious as to why a reflector would not ... reflect.

Loirae

Bordeaux, I'm working on all your levels at one time. When one starts to beat me down, I switch to a different punishment!

Loirae · Post by **Loirae** » Mon Sep 26, 2005 6:07 am

Twleve days later and I've finally made it to the blue teleporter only to not have enough boxes to get to the z-bot. Probably should't blow up the kaboom.

But on the plus side I'm REALLY fast at the reflectors on the buttons section! Don't even have to think about it any more.

bordeaux · Post by **bordeaux** » Mon Sep 26, 2005 1:46 pm

I admire your perseverance!

Keep trying

Loirae · Post by **Loirae** » Tue Sep 27, 2005 5:48 am

I've never been so happy to be blown up by a UFO. because in this case it means I've made progress. But the joy is wearing off....

OK, back to it then!

bordeaux · Post by **bordeaux** » Thu Dec 15, 2005 5:34 am

I believe this was my first evening stroll. A warm and balmy night. Enjoy

plum_eria2000 · Post by **plum_eria2000** » Fri Jun 15, 2007 3:23 pm

Oh...I was hoping to find a bit of a hint for this level by now...but there aren't many here, so I'll ask...hint, please?

And why in the world doesn't a reflector reflect? What stops it?

Thanks,
Plumeria

Amnon · Post by **Amnon** » Thu Aug 08, 2013 5:40 am

Really cool... and hard... I especially like the first, button puzzle! Thanks!

annedanner · Post by **annedanner** » Fri Aug 09, 2013 11:17 pm

What is the trick with the first part, please?

Amnon · Post by **Amnon** » Sat Aug 10, 2013 9:37 am

What is the trick with the first part, please?

The main trick is: to shoot the prism that is on the conveyor button, so that the prisms on the conveyor belts go on the red and blue buttons. However, that shot must bend its way through lots of reflectors on the way. Another point to remember is that the pink button must be covered next after the conveyors.

Amnon · Post by **Amnon** » Tue Aug 13, 2013 4:35 am

Any success, Anne?

annedanner · Post by **annedanner** » Tue Aug 13, 2013 1:32 pm

I little - I can now break the prism to start the conveyor again. I'm not seeing the steps in arranging the reflectors to be able to go to the next section.

Amnon · Post by **Amnon** » Tue Aug 13, 2013 1:44 pm

I little - I can now break the prism to start the conveyor again. I'm not seeing the steps in arranging the reflectors to be able to go to the next section.

So here is the order of button-covering:
1. Prism on conveyor button
2. Light blue
3. Light green
(time to shift a reflector from the top)
4. Both conveyor belts - off light blue and light green
5. Pink
6. Light blue
(time to shift another reflector from the top)
7. Light blue --> white
8. Light blue
9. Light green
Then blast the prism: reflectors from the conveyor belts will shift down to cover the red and blue buttons.

annedanner · Post by **annedanner** » Wed Aug 14, 2013 9:05 am

Well, now, that was sure a humdinger! Thanks for your help with the first part, Amnon.