The Wonderland Board

Hi
The SS NUTSHELL is repaired, new supplies are stored and everything is ready for the next adventure. Almost everything...
And so: Welcome back aboard and have a pleasant journey.

(Using the known texture 'Tofoship'.)

Glad you haven't disappeared forever Chip!

Just to let you know I'm working on it, but keep coming to grief.
One day I'll find the right way to get the hydraulic system working.

Back later ...

I second all that Liz said above.
I can really appreciate the time and effort you put into all your levels.

Hi Liz, hi Keeks
Had a long time at the drawing-board to develop a thread for the 'Legends'. But now the story unfolds, and there will be more time for the forum again.
Hope to find the time for some of your own levels soon.
Greetings, Chip.

Yes I did it! It took me the longest time to work out how to insert the drivers. I kept messing up completely.
After that I didn't use the kegs in the right order
Finally made it with 1 steel box to spare.

Excellent thinker stinker. Thanks Chip!

It sounds like I had the same problems as Liz, those compression drivers are tricky things.

Ace puzzle Chip, lots fo fun, thank-you!

Hints:

1. Redirect the first driver left into the lower unit, then up into the inner circle of the upper one. Repeat with two drivers for the outer circle.

2. Insert the other 3 drivers into the lower unit, then use the steel boxes to fill the two pools to the right side of the regulator.

3. With both bulkheads open, you can get the kegs. Prepare them below the other two pools of the regulator.

4. Use the left wooden box and the rafts to build a closed track for the output-input-drivers, then push the topmost steel box R to close the track around the regulator.

5. Push the kegs (in the right order) into the last two pools and use the boxes from the front room to get the coins outside the navigation lights.