The Wonderland Board

Keep the lady upright, please!

(And use the texture 'Tofoship'. Thanks!)

I do like these levels!

Unfortunately I couldn't make it work as a four-stroke (kept losing the green sphere) but it worked fine as a two-stroke. Unless that was the idea all along.

Great fun, thanks!

Here are the hints for this one:

1. How to start the CPU?
- Get onto the white button to release the botty in the lower right corner, then go L onto the sign.
- Watch the released botty: It will go to the lower left corner and pass the water basin there 1, 2, 3 times.
- Now the upper left corner. Concentrate again on the botty and the water basin: 1, 2, 3.
- Now the upper right corner. The botty and the water basin: 1, 2, ...
- ... get onto the red button at 3! Here's your well working CPU.

2. How to start the engine?
It's important to keep the rhythm of the cannons!
- Wait for the next shot, then quickly push the lowest cannon L.
- Go back R and wait again for the next shot, then slide U and push the next cannon L onto the conveyor. Stand R of the green TP to be safe.
- Next shot, then quickly enter the green TP to push the third cannon in position. Slide D and stand L of the yellow TP.
- Next shot, then (as fast as possible) enter the yellow TP. The device should work now.
- When it's safe: Leave the room through the yellow TP and push the first steel box R into the black TP.

3. How to start the equalizers?
- Don't push the the yellow or the green sphere 'by hand'!
- Wait until the nearby conveyor stops and get onto it. You'll push automatically and just at the right moment.

4. How to start the stern weights?
- Push the second steel box L over the tramp and into the left black TP.
- Return to the right black TP and push the steel box into it. Here you go!
- Enter the black TP and (avoiding the boulders) get the coins.

5. The exit puzzle:
Before you deal with the last coins: Make sure, that the switch conveyors are pointing 'in'!

Good luck!