Page 1 of 1

New Level - Garcia Keeping it Clean

Posted: Thu May 09, 2013 1:15 pm
by anssur
Garcia is playing in some soap bubbles.

Thanks to Liz for some early testing on this one.

Posted: Thu May 09, 2013 3:23 pm
by Mark
Hi Russ, your level won't start with the custom texture.
It comes up with an error message and "Flag 1" :(

I took a look at the sizes on the "Sudz" texture and noticed that wallside1a and wallside1b are not the standard 64x64.
Unfortunately, some video cards (like mine) can not display unequal sizes.

Posted: Thu May 09, 2013 5:48 pm
by anssur
Thanks Mark
I made this texture a long time ago and it looks like I didn't check close enough.

My video card is very forgiving.

The corrected texture has been posted.

Russ

Posted: Thu May 09, 2013 6:01 pm
by Mark
anssur wrote:The corrected texture has been posted.

Russ
Thank you Russ! :D

Your level starts perfectly now! 8)

Posted: Thu May 09, 2013 6:25 pm
by Amnon
This was hard, it took me several hours.

At first when the texture did not work, I used the editor to cancel it, then I found the updated texture and played with it as well.

Thanks!

Posted: Thu May 09, 2013 8:36 pm
by Mark
Hi Russ!

I was able to get Peegue to the exit safely
but I did not use 2 items and 2 break tiles.
Was that suppose to happen?

Excellent Challenge, my friend! 8)

Posted: Thu May 09, 2013 10:50 pm
by Amnon
but I did not use 2 items and 2 break tiles.
I can see one, though it's not how I made it - what's the other?

Posted: Thu May 09, 2013 11:56 pm
by Mark
Looks like we both covered the blue button with something different.
I'm not sure what the intended way was now... :?

Posted: Fri May 10, 2013 12:04 am
by Amnon
Looks like we both covered the blue button with something different.
Yes we did.
I'm not sure what the intended way was now...
I had just the exact number of bridges for my solution. Did you use them all? if not, then my solution is more likely to be the intended one.

Posted: Fri May 10, 2013 12:34 am
by Mark
Amnon wrote:I had just the exact number of bridges for my solution. Did you use them all? if not, then my solution is more likely to be the intended one.
I had two bridges left over for my solution. However, it would not have been necessary for there to be three blue buttons in a row for your solution... just one.

Posted: Fri May 10, 2013 12:38 am
by Amnon
However, it would not have been necessary for there to be three blue buttons in a row for your solution... just one.
Right so! I just assumed it was a misdirection. :oops:

Posted: Fri May 10, 2013 1:04 am
by Mark
I'm sure my way is not the intended one either.
Too many things left over and my sphere didn't need to bank off that fake wall. :roll:

Garcia Keeping it Clean

Posted: Fri May 10, 2013 1:54 pm
by doodlebug
How do you cover the blue button please.

Thanks

Annie

Posted: Sat May 11, 2013 10:04 am
by Amnon
How do you cover the blue button please.
Two different objects can cover the blue button. My way is to cover it with a green sphere, which is first pushed Right and Up, then moves up by linked-sphere action, then pushed Right, then moves Up by linked-sphere action. Mark instead uses the Z-bot to cover the blue button.

Posted: Sat May 11, 2013 4:44 pm
by annedanner
Hey Russ,

Thanks for the level. I'm afraid that I'm going to have to see a walk through for the bottie area. I don't think my fingers are fast enough.

Garcia Keeping it Clean

Posted: Sat May 11, 2013 6:54 pm
by doodlebug
The bottie I can control but I can't get the box in place to block it or use the green spheres like Amnon. At this point I would just like a walk through also. Thanks Mark for the hint but I just can't get it with either hint. This one is just a little too hard for my poor old brain.

Thanks

Annie

Posted: Sun May 12, 2013 3:58 am
by Blazeknight
Great level. Wonderful. Thank you :)

Posted: Sun May 12, 2013 6:40 am
by Liz Mayhew
This has changed a bit since I tested the level.

It's now much harder :twisted: :twisted:

Previously I could cover a blue button with the steel box. Now I'm having problems getting that into position to preserve the z-bot's life.

Posted: Sun May 12, 2013 8:12 am
by Amnon
At this point I would just like a walk through also.
Here is my way:

1. Both metal boxes go in respective water holes.
2. Boulder fills up the top water hole.
3. Walk around carefully and push bottom green sphere right and up.
4. Walk (over 3 breaktiles) to jumping arena.
5. Jump Right-Right-Left-Right-Left.
6. Push metal box down.
7. Jump Right, then Right-Right-Down
8. Clear Z-bot area (easier to start counter-clockwise).
9. Carefully push metal box to the top area, but only to the second from top row.
10. Enter jumping arena from the bottom (jumping Right), then jump Right-Right-Up to colllect coins. When exiting area, push green sphere to the left.
11. Push green sphere up, then quickly block its way back by pushing the metal box to the left.
12. Push bottom green sphere to the right.
13. Push top green sphere up, then cover the white button with either box or sphere.
14. Activate hidden conveyor button to quickly jump into first area (top-right).
15. Get boulder on yellow button, take coin in yellow gate and leave area.
16. Collect remaining bonus coin and coin (enter jumping arena from bottom).
17. Exit.

Garcia Keeping it Clean

Posted: Sun May 12, 2013 3:21 pm
by doodlebug
Thanks Anssur that was a fun but very hard level. I finally got it with the help getting the metal box out. Thanks Mark and Amnon for the help.

Annie

Posted: Mon May 13, 2013 2:39 pm
by Liz Mayhew
I quite agree Annie! That was so hard this time round, and I really needed Amnon's help, so thanks for that Amnon. :D

Finally finished this one Russ.

Thanks for the puzzling fun. :D :D