The Wonderland Board

Hi everyone...

As I said and in my last posts, I have Windows 10 Home Premium in my new laptop.
While I can play the three original Wonderland Games perfectly, unfortunately I can't play the three Wonderland Adventure Games.
When I try to play them, messages appear in my screen (I put screenshots about those messages below) that those games are unable to set in graphic mode.
I already updated them in my last graphic drivers but still, no luck. And I already installed DirectPlay, you know.

I would appreciate any help from you.~

The user redbird is also having same problem, and it is still unresolved.

Could you give me the information such as model number of your laptop and the model of your CPU and GPU? I don't know what to do here, but if you could provide me these details, it may be possible to catch the issue.

Ok Aryan...I will give you all my information about my laptop:

Model of laptop: HP Laptop 15-bs0xx
Windows 10 Home Premium 64-bit
RAM 4GB
CPU: Intel Core i3-6006U @ 2.00GHz

If you need something else, just tell me to write it here.

I think I had this problem once with the WA3 Editor and/or Plaayer? I'm pretty sure it used to happen when it tried to launch in full screen. I haven't played in a whwhile but I seem to recall it fixing itself though... Hmm. Have you tried changing screen resolution?

I have created a small program in Blitz3D which performs a simple test on your available graphics card. Unzip the file into a fresh directory and run it and it'll create a file named gfxlog.txt in the root directory
All you have to do is to send me the contents of that "gfxlog.txt".

This way I can know how Blitz3D understands your graphics hardware.

Ok Aryan... I did what you said and those are the contents of the gfxlog.txt in my laptop:

Current GFX Driver is Βασικό πρόγραμμα οδήγησης οθόνης
It is 3D-capable
Currently selected GFX mode is 320, 200, 32
It is 3D-capable
Currently selected GFX mode is 320, 240, 32
It is 3D-capable
Currently selected GFX mode is 400, 300, 32
It is 3D-capable
Currently selected GFX mode is 512, 384, 32
It is 3D-capable
Currently selected GFX mode is 640, 400, 32
It is 3D-capable
Currently selected GFX mode is 640, 480, 32
It is 3D-capable
Currently selected GFX mode is 1024, 768, 32
It is 3D-capable
Currently selected GFX mode is 1152, 864, 32
It is 3D-capable
Currently selected GFX mode is 1280, 600, 32
It is 3D-capable
Currently selected GFX mode is 1280, 720, 32
It is 3D-capable
Currently selected GFX mode is 1280, 768, 32
It is 3D-capable
Currently selected GFX mode is 1280, 800, 32
It is 3D-capable
Currently selected GFX mode is 1280, 960, 32
It is 3D-capable
Currently selected GFX mode is 1280, 1024, 32
It is 3D-capable
Currently selected GFX mode is 1360, 768, 32
It is 3D-capable
Currently selected GFX mode is 1366, 768, 32
It is 3D-capable
Currently selected GFX mode is 1400, 1050, 32
It is 3D-capable
Currently selected GFX mode is 1440, 900, 32
It is 3D-capable
Currently selected GFX mode is 1600, 900, 32
It is 3D-capable
Currently selected GFX mode is 1680, 1050, 32
It is 3D-capable
Currently selected GFX mode is 1920, 1080, 32
It is 3D-capable
Currently selected GFX mode is 320, 200, 16
It is 3D-capable
Currently selected GFX mode is 320, 240, 16
It is 3D-capable
Currently selected GFX mode is 400, 300, 16
It is 3D-capable
Currently selected GFX mode is 512, 384, 16
It is 3D-capable
Currently selected GFX mode is 640, 400, 16
It is 3D-capable
Currently selected GFX mode is 640, 480, 16
It is 3D-capable
Currently selected GFX mode is 1024, 768, 16
It is 3D-capable
Currently selected GFX mode is 1152, 864, 16
It is 3D-capable
Currently selected GFX mode is 1280, 600, 16
It is 3D-capable
Currently selected GFX mode is 1280, 720, 16
It is 3D-capable
Currently selected GFX mode is 1280, 768, 16
It is 3D-capable
Currently selected GFX mode is 1280, 800, 16
It is 3D-capable
Currently selected GFX mode is 1280, 960, 16
It is 3D-capable
Currently selected GFX mode is 1280, 1024, 16
It is 3D-capable
Currently selected GFX mode is 1360, 768, 16
It is 3D-capable
Currently selected GFX mode is 1366, 768, 16
It is 3D-capable
Currently selected GFX mode is 1400, 1050, 16
It is 3D-capable
Currently selected GFX mode is 1440, 900, 16
It is 3D-capable
Currently selected GFX mode is 1600, 900, 16
It is 3D-capable
Currently selected GFX mode is 1680, 1050, 16
It is 3D-capable
Currently selected GFX mode is 1920, 1080, 16
It is 3D-capable
Current GFX Driver is Intel(R) HD Graphics 520
It is 3D-capable
Currently selected GFX mode is 320, 200, 32
It is 3D-capable
Currently selected GFX mode is 320, 240, 32
It is 3D-capable
Currently selected GFX mode is 400, 300, 32
It is 3D-capable
Currently selected GFX mode is 512, 384, 32
It is 3D-capable
Currently selected GFX mode is 640, 400, 32
It is 3D-capable
Currently selected GFX mode is 640, 480, 32
It is 3D-capable
Currently selected GFX mode is 1024, 768, 32
It is 3D-capable
Currently selected GFX mode is 1152, 864, 32
It is 3D-capable
Currently selected GFX mode is 1280, 600, 32
It is 3D-capable
Currently selected GFX mode is 1280, 720, 32
It is 3D-capable
Currently selected GFX mode is 1280, 768, 32
It is 3D-capable
Currently selected GFX mode is 1280, 800, 32
It is 3D-capable
Currently selected GFX mode is 1280, 960, 32
It is 3D-capable
Currently selected GFX mode is 1280, 1024, 32
It is 3D-capable
Currently selected GFX mode is 1360, 768, 32
It is 3D-capable
Currently selected GFX mode is 1366, 768, 32
It is 3D-capable
Currently selected GFX mode is 1400, 1050, 32
It is 3D-capable
Currently selected GFX mode is 1440, 900, 32
It is 3D-capable
Currently selected GFX mode is 1600, 900, 32
It is 3D-capable
Currently selected GFX mode is 1680, 1050, 32
It is 3D-capable
Currently selected GFX mode is 1920, 1080, 32
It is 3D-capable
Currently selected GFX mode is 320, 200, 16
It is 3D-capable
Currently selected GFX mode is 320, 240, 16
It is 3D-capable
Currently selected GFX mode is 400, 300, 16
It is 3D-capable
Currently selected GFX mode is 512, 384, 16
It is 3D-capable
Currently selected GFX mode is 640, 400, 16
It is 3D-capable
Currently selected GFX mode is 640, 480, 16
It is 3D-capable
Currently selected GFX mode is 1024, 768, 16
It is 3D-capable
Currently selected GFX mode is 1152, 864, 16
It is 3D-capable
Currently selected GFX mode is 1280, 600, 16
It is 3D-capable
Currently selected GFX mode is 1280, 720, 16
It is 3D-capable
Currently selected GFX mode is 1280, 768, 16
It is 3D-capable
Currently selected GFX mode is 1280, 800, 16
It is 3D-capable
Currently selected GFX mode is 1280, 960, 16
It is 3D-capable
Currently selected GFX mode is 1280, 1024, 16
It is 3D-capable
Currently selected GFX mode is 1360, 768, 16
It is 3D-capable
Currently selected GFX mode is 1366, 768, 16
It is 3D-capable
Currently selected GFX mode is 1400, 1050, 16
It is 3D-capable
Currently selected GFX mode is 1440, 900, 16
It is 3D-capable
Currently selected GFX mode is 1600, 900, 16
It is 3D-capable
Currently selected GFX mode is 1680, 1050, 16
It is 3D-capable
Currently selected GFX mode is 1920, 1080, 16
It is 3D-capable

I've did some modding in WA Editor v3.00 exe. Download the WA Editor v3.00 (without any archive) by clicking here. You may also download the WA Editor setup (with the archive having cool stuff) by clicking here.

Now download my modded exe from here: https://archive.zbots.space/files/wg_modded.exe
Put it in your WA Editor folder. Try to run "wg.exe" first and then run "wg_modded.exe".

Hope it helps!
Aryan

Weird... I checked the code for that line, it uses IfGFXMode3DExists and is returning FALSE for you for some reason. Aryan, what did you test for in your program?

Midnight Synergy wrote: Sat Dec 08, 2018 1:33 pm Weird... I checked the code for that line, it uses IfGFXMode3DExists and is returning FALSE for you for some reason. Aryan, what did you test for in your program?

I used GFXMode3D and GFXDriver3D to check the graphics card drivers and all the GFX resolutions and they're returning true. I thought it was an issue with Blitz3D version so I imported WAE wg.exe to the latest version of Blitz3D using resource hacker and uploaded it here for testing. Also I'm sure it's fine to release it here just for testing.
If the problem is still there with this modded version then I'll assume that IfGFXMode3DExists is the main culprit here.

I KNOW HOW TO FIX THIS!!!

Step 1. Locate the games player (i.e the launcher)

Step 2. Choose Full screen and MAKE SURE to choose 640x480

Step 3. Save that, and close the launcher.

Step 4. Right click on the actual game.exe (or wg.exe) and go to 'Properties'

Step 5. Go to 'Compatibility'

Step 6. Click the boxes next to 'Run in 640x480 Screen Resolution' and 'Disable Full Screen optomizations'

Step 7. (Optional) Click on 'run this program in compatibility mode for; and choose Windows 7.

This should do the trick, as it fixed the problem for me several times.

This option did not work for me. I don't even have an option to run in full screen or not.

john1013 wrote: Sun Dec 09, 2018 1:49 pm This option did not work for me. I don't even have an option to run in full screen or not.

Try to run my modded wg.exe of WA Editor v3.00. I've put the download link above.

Aryan wrote: Sun Dec 09, 2018 1:52 pm

john1013 wrote: Sun Dec 09, 2018 1:49 pm This option did not work for me. I don't even have an option to run in full screen or not.

Try to run my modded wg.exe of WA Editor v3.00. I've put the download link above.

Nope, I get the same error message as stated above.

john1013 wrote: Sun Dec 09, 2018 2:16 pm

Aryan wrote: Sun Dec 09, 2018 1:52 pm

john1013 wrote: Sun Dec 09, 2018 1:49 pm This option did not work for me. I don't even have an option to run in full screen or not.

Try to run my modded wg.exe of WA Editor v3.00. I've put the download link above.

Nope, I get the same error message as stated above.

Run my gfxtest utility and post the contents of "gfxlog.txt" here.

You can download it from here - http://www.pcpuzzle.com/forum/download/ ... p?id=48301

Also, try deleting "display.wdf" file from UserData folder (of WA Editor v3.00). In WA1 in should be in root folder. For MOFI and POTZ, you can rename "localsaveoff.txt" to "localsaveon.txt" to reset all user options.

Current GFX Driver is Primary Display Driver
It is 3D-capable
Currently selected GFX mode is 320, 200, 32
It is 3D-capable
Currently selected GFX mode is 320, 240, 32
It is 3D-capable
Currently selected GFX mode is 400, 300, 32
It is 3D-capable
Currently selected GFX mode is 512, 384, 32
It is 3D-capable
Currently selected GFX mode is 640, 400, 32
It is 3D-capable
Currently selected GFX mode is 640, 480, 32
It is 3D-capable
Currently selected GFX mode is 1024, 768, 32
It is 3D-capable
Currently selected GFX mode is 1280, 600, 32
It is 3D-capable
Currently selected GFX mode is 1280, 720, 32
It is 3D-capable
Currently selected GFX mode is 1280, 768, 32
It is 3D-capable
Currently selected GFX mode is 1360, 768, 32
It is 3D-capable
Currently selected GFX mode is 1366, 768, 32
It is 3D-capable
Current GFX Driver is Intel(R) HD Graphics 520
It is 3D-capable
Currently selected GFX mode is 320, 200, 32
It is 3D-capable
Currently selected GFX mode is 320, 240, 32
It is 3D-capable
Currently selected GFX mode is 400, 300, 32
It is 3D-capable
Currently selected GFX mode is 512, 384, 32
It is 3D-capable
Currently selected GFX mode is 640, 400, 32
It is 3D-capable
Currently selected GFX mode is 640, 480, 32
It is 3D-capable
Currently selected GFX mode is 1024, 768, 32
It is 3D-capable
Currently selected GFX mode is 1280, 600, 32
It is 3D-capable
Currently selected GFX mode is 1280, 720, 32
It is 3D-capable
Currently selected GFX mode is 1280, 768, 32
It is 3D-capable
Currently selected GFX mode is 1360, 768, 32
It is 3D-capable
Currently selected GFX mode is 1366, 768, 32
It is 3D-capable

I also can't find the display.wdf, I have looked in every folder of the editor and the game.

john1013 wrote: Sun Dec 09, 2018 2:26 pm Current GFX Driver is Primary Display Driver
It is 3D-capable
Currently selected GFX mode is 320, 200, 32
It is 3D-capable
Currently selected GFX mode is 320, 240, 32
It is 3D-capable
Currently selected GFX mode is 400, 300, 32
It is 3D-capable
Currently selected GFX mode is 512, 384, 32
It is 3D-capable
Currently selected GFX mode is 640, 400, 32
It is 3D-capable
Currently selected GFX mode is 640, 480, 32
It is 3D-capable
Currently selected GFX mode is 1024, 768, 32
It is 3D-capable
Currently selected GFX mode is 1280, 600, 32
It is 3D-capable
Currently selected GFX mode is 1280, 720, 32
It is 3D-capable
Currently selected GFX mode is 1280, 768, 32
It is 3D-capable
Currently selected GFX mode is 1360, 768, 32
It is 3D-capable
Currently selected GFX mode is 1366, 768, 32
It is 3D-capable
Current GFX Driver is Intel(R) HD Graphics 520
It is 3D-capable
Currently selected GFX mode is 320, 200, 32
It is 3D-capable
Currently selected GFX mode is 320, 240, 32
It is 3D-capable
Currently selected GFX mode is 400, 300, 32
It is 3D-capable
Currently selected GFX mode is 512, 384, 32
It is 3D-capable
Currently selected GFX mode is 640, 400, 32
It is 3D-capable
Currently selected GFX mode is 640, 480, 32
It is 3D-capable
Currently selected GFX mode is 1024, 768, 32
It is 3D-capable
Currently selected GFX mode is 1280, 600, 32
It is 3D-capable
Currently selected GFX mode is 1280, 720, 32
It is 3D-capable
Currently selected GFX mode is 1280, 768, 32
It is 3D-capable
Currently selected GFX mode is 1360, 768, 32
It is 3D-capable
Currently selected GFX mode is 1366, 768, 32
It is 3D-capable

Weird... Try deleting "display.wdf" file from UserData folder (of WA Editor v3.00). In WA1 in should be in root folder. For MOFI and POTZ, you can rename "localsaveoff.txt" to "localsaveon.txt" to reset all user options.

I'm updating my gfxtest utility to you IfGFXMode3DExists to check your graphics card. So just be here for a while.

I have updated the utility and it now uses IfGFXMode3DExisits to check your GFX resolutions.

I assume that you have tried my "display.wdf" deleting method above.

I also can't find the display.wdf, I have looked in every folder of the editor and the game.

Aryan wrote: Sun Dec 09, 2018 2:32 pm I have updated the utility and it now uses IfGFXMode3DExisits to check your GFX resolutions.

I assume that you have tried my "display.wdf" deleting method above.

I don't know what your reading, but I'm confused as hell
Current GFX Driver is Primary Display Driver
It is 3D-capable
Currently selected GFX mode is 320, 200, 32
It is 3D-capable
Currently selected GFX mode is 320, 240, 32
It is 3D-capable
Currently selected GFX mode is 400, 300, 32
It is 3D-capable
Currently selected GFX mode is 512, 384, 32
It is 3D-capable
Currently selected GFX mode is 640, 400, 32
It is 3D-capable
Currently selected GFX mode is 640, 480, 32
It is 3D-capable
Currently selected GFX mode is 1024, 768, 32
It is 3D-capable
Currently selected GFX mode is 1280, 600, 32
It is 3D-capable
Currently selected GFX mode is 1280, 720, 32
It is 3D-capable
Currently selected GFX mode is 1280, 768, 32
It is 3D-capable
Currently selected GFX mode is 1360, 768, 32
It is 3D-capable
Currently selected GFX mode is 1366, 768, 32
It is 3D-capable
Current GFX Driver is Intel(R) HD Graphics 520
It is 3D-capable
Currently selected GFX mode is 320, 200, 32
It is 3D-capable
Currently selected GFX mode is 320, 240, 32
It is 3D-capable
Currently selected GFX mode is 400, 300, 32
It is 3D-capable
Currently selected GFX mode is 512, 384, 32
It is 3D-capable
Currently selected GFX mode is 640, 400, 32
It is 3D-capable
Currently selected GFX mode is 640, 480, 32
It is 3D-capable
Currently selected GFX mode is 1024, 768, 32
It is 3D-capable
Currently selected GFX mode is 1280, 600, 32
It is 3D-capable
Currently selected GFX mode is 1280, 720, 32
It is 3D-capable
Currently selected GFX mode is 1280, 768, 32
It is 3D-capable
Currently selected GFX mode is 1360, 768, 32
It is 3D-capable
Currently selected GFX mode is 1366, 768, 32
It is 3D-capable

john1013 wrote: Sun Dec 09, 2018 2:33 pm I also can't find the display.wdf, I have looked in every folder of the editor and the game.

Also, in the launcher, you can set the resolution to 640x480x32 and then can set fullscreen mode.

the only option i have is to change to windows 7 or any other operation system (which I have tried all of them)
the resolution to 640x480 and to disable full-screen optimizations.
there is nothing on there about using full screen as the other poster above mentioned.
I can reduce my color mode or change dpi settings but I don't know what i'm doing on the dpi so I haven't touched it.

john1013 wrote: Sun Dec 09, 2018 2:47 pm the only option i have is to change to windows 7 or any other operation system (which I have tried all of them)
the resolution to 640x480 and to disable full-screen optimizations.
there is nothing on there about using full screen as the other poster above mentioned.
I can reduce my color mode or change dpi settings but I don't know what i'm doing on the dpi so I haven't touched it.

I meant that in the launcher, you just set resolution to 640x480x32 and then you should be able to select full screen mode in the launcher. Also, do you have any folder named UserData in the WA Editor root directory? I think I should send you my "display.wdf" file.

[/quote]
I meant that in the launcher, you just set resolution to 640x480x32 and then you should be able to select full screen mode in the launcher. Also, do you have any folder named UserData in the WA Editor root directory? I think I should send you my "display.wdf" file.
[/quote]

I can set the resolution in compatibility screen but the program never opens to change to full screen. Yes I found the user data in the editor but none of the folders have the display.wdf in it. I even did a search for it and computer cant find it.

john1013 wrote: Sun Dec 09, 2018 2:59 pm

I meant that in the launcher, you just set resolution to 640x480x32 and then you should be able to select full screen mode in the launcher. Also, do you have any folder named UserData in the WA Editor root directory? I think I should send you my "display.wdf" file.

I can set the resolution in compatibility screen but the program never opens to change to full screen. Yes I found the user data in the editor but none of the folders have the display.wdf in it. I even did a search for it and computer cant find it.

I am sending you my "display.wdf" file. Put it in UserData folder and try to run "wg.exe". Also, remove any compatibility settings you made for the "wg.exe".

No, unable to set graphics mode is the error. same error message

Patrick told me it was an new error that cropped up the latest windows 10 update from october. I reset my computer yesterday but still unable to load or play these games. However, wonderland, and secrets, I can play. RTW I get a memory access violation.

john1013 wrote: Sun Dec 09, 2018 3:26 pm Patrick told me it was an new error that cropped up the latest windows 10 update from october. I reset my computer yesterday but still unable to load or play these games. However, wonderland, and secrets, I can play. RTW I get a memory access violation.

I think you meant October 2018 update. Yeah, it caused my WA Editor v3.00 to lag, so I reverted back to the previous version.

About the RTW MAV... that's weird. Sofia also had same problem, but he/she installed the game from his/her collection and it fixed.

I am currently unable to find any more possible solution(s). I'll be now doing some research on this, so I may contact you once more.

I lost my collections over the years (bought then over 12 years ago), so I found free versions of wonderland and secrets and played those, then I bought adventures and mysteries (now out $24) so need less to say, I am very upset. Hopefully since Patrick knows whats going on they can fix it.
Thank you for your help so far

john1013 wrote: Sun Dec 09, 2018 3:40 pm I lost my collections over the years... (snip)
Thank you for your help so far

Careful there. I've known people in a similar situation to you, but you can't justify doing that.

Wonderman109 wrote: Mon Dec 10, 2018 2:42 am

john1013 wrote: Sun Dec 09, 2018 3:40 pm I lost my collections over the years... (snip)
Thank you for your help so far

Careful there. I've known people in a similar situation to you, but you can't justify doing that.

I bought 2 games that I can't play, what needs to be justified?