HyperCam Question!

jdl · Post by **jdl** » Wed Sep 17, 2008 12:36 am

Um... I just got an Unregistered HyperCam and when I record, it records it good, but its going too fast! Can you tell me how to adjust the settings to make it stop that? Oh, and how can I fix the quality? Its looks pretty bad...

bround · Post by **bround** » Wed Sep 17, 2008 9:22 am

OK! I help, cilck this site, http://www.youtube.com/watch?v=Sqmv7n9ZVwU

bround · Post by **bround** » Wed Sep 17, 2008 9:43 am

Or. go to my channel, www.youtube.com/user/OrangeTeamo

bround · Post by **bround** » Wed Sep 17, 2008 9:59 am

To recording, Cilck Start Rec. and to stop the recording: Cilck Stop Rec, and to paume the recording: Cilck Pause and to recording non-Pause, Cilck Stop Pause! and show the go recording! Go www.youtube.com and join! To Sign Up, Cilck Sign Up! have fun!

tyteen4a03 · Post by **tyteen4a03** » Wed Sep 17, 2008 11:21 am

He knows how to record.
Also,he has a Youtube account.

uneekrose · Post by **uneekrose** » Wed Sep 17, 2008 3:16 pm

Jacob try hypercams help pages and tech forum. Hope this helps.

http://www.hyperionics.com/

jdl · Post by **jdl** » Wed Sep 17, 2008 4:54 pm

I know how to record. I have tried the help page and it doesn't help. Also, I don't have a YouTube account. But I'll try the links Bround has given me.

I just want to fix the quality. IT IS VERY BAD!!!

jdl · Post by **jdl** » Wed Sep 17, 2008 5:19 pm

Nevermind! I fixed it.

I just need to know how to record the sound because I have it checked, but it won't. Do I need a microphone?

uneekrose · Post by **uneekrose** » Wed Sep 17, 2008 6:41 pm

Good, I'm glad you fixed it. You don't need a youtube account to go there and look at videos.

jdl · Post by **jdl** » Wed Sep 17, 2008 7:00 pm

I fixed the quality, but, when I go to play it back, the video goes waaaaaay too fast.

Show me your settings.

uneekrose · Post by **uneekrose** » Wed Sep 17, 2008 8:25 pm

I use fraps to record video, see if there is some where in the settings for the fps (frames per second) if there is you probably need to adjust it to a lower number.(I think)

mqdar · Post by **mqdar** » Wed Sep 17, 2008 8:35 pm

uneekrose wrote:I use fraps to record video, see if there is some where in the settings for the fps (frames per second) if there is you probably need to adjust it to a lower number.(I think)

I don't think fps adjusts the speed of the recording. It adjusts... how do you explain it? It means that in every second there will be more frames. Of course, we don't notice the difference if the there's 12 or more fps. Lowering the fps would just the video file a smaller size.

uneekrose · Post by **uneekrose** » Wed Sep 17, 2008 9:13 pm

Yup, your right mqdar. I'm just learning how to use my fraps.

Jacob I sent you to the wrong help solution center before, try this one.

http://www.hyperionics.com/

the other was for hypersnap this one is for hypercam.

jdl · Post by **jdl** » Wed Sep 17, 2008 9:47 pm

YAYYYYYYYYYY!!! I just had to adjust the Rate In FPS!

I now have it as: Record: 10 Playback: 10.

Thanks for your all help!

uneekrose · Post by **uneekrose** » Wed Sep 17, 2008 10:06 pm

Yay.....glad I could help Jacob.

jdl · Post by **jdl** » Thu Sep 18, 2008 12:00 am

:Sigh: Looks like Vista wasn't compatible with HyperCam 2 because (this happened 2 times) my compuer would freeze, then go into "Sleep Mode." (Or at least thats what it looked like.) :Sigh:

Oh, well! There's not much I would use it for.

uneekrose · Post by **uneekrose** » Thu Sep 18, 2008 4:30 am

When I was trying out screen capture software and I went to record a level I had to set my display and the bit rate to it's lower setting otherwise it would freeze up on me or just didn't record very good. I really liked fraps so I bought it. The trial of fraps will record 30 sec. intervals and you can use microsoft movie maker to piece them together.

Qloof234 · Post by **Qloof234** » Thu Sep 18, 2008 2:48 pm

jdl wrote:Nevermind! I fixed it.

I just need to know how to record the sound because I have it checked, but it won't. Do I need a microphone?

Yeah, the sound recording fails, it doesn't do anything. You need a microphone and the sound to be coming out the speakers.

Also, if it's recording sound and you have a microphone it'll pick up your voice as well.