The Wonderland Board

CUSTOM MODELS CATALOG
May 27, 2007 editted version
VOLUME III Categories: Plants Trees & Flowers / Signs & Billboards / Space Creatures & Items / Stage Settings / St.Patricks Day Items / Thanksgiving & Fall Items / Valentines Day / Vehicles / Wonderland Game-like Elements, Tiles Objects / Misc. Search Items

for quick link to volume 1, categories click here:
http://www.pcpuzzle.com/forum/viewtopic.php?t=12302
Vol.2 http://www.pcpuzzle.com/forum/viewtopic.php?t=12638

PLANTS, TREES & FLOWERS

Anniem / jg ** / http://www.pcpuzzle.com/forum/viewtopic.php?t=9441
2 models using treebird by jg(see below)

bigtree/ jg / http://www//pcpuzzle.com/forum/viewtopic.php?t=8447
pine tree approx. 4x standard height and size

CATM03 / http://www//pcpuzzle.com/forum/viewtopic.php?t=4043
2 Models of Mosaic skins on "popoiary"
Red skin on triple-sphered topiary tree model of Popos
Green mosaic skin on spade shaped topiary tree model of Popos.

CATM15/cat/ http://www.pcpuzzle.com/forum/viewtopic.php?t=5058
3 Models of Floor tiles
nature, trees grass
nature,Trees with colorful leaves and mountains covered with snow
Floor tile saying: CAT

CATM16/cat/ http://www.pcpuzzle.com/forum/viewtopic.php?t=5074
4 Models of Floor tiles
2 of hummingbirds and flowers
A white confederate and a Pink Confederate
woodpecker on the side of a tree!

CATM27 / http://www.pcpuzzle.com/forum/viewtopic.php?t=5436
3 Models
A = 3x3 Mauve colored floor panel = Model1
B = 3x3 Butterfly bordered, baby-blue floor panel = Model2
C = Darker version of popo's triple-sphered topiary tree = Model3

CATM34 / http://www.pcpuzzle.com/forum/viewtopic.php?t=5664
2 plants from popoplants1
A = Large Fern = Model1
B = Potted leafy plant = Model2

CATM36 / http://www.pcpuzzle.com/forum/viewtopic.php?t=5717
3 Models
popo's lily pad
gazebo
grass model by Steve

CATM58 / http://www.pcpuzzle.com/forum/viewtopic.php?t=6069
2 Models of Floor Tiles
Field of small purple and blue flowers
Jonquils (crocus type flower)

CATM74 / http://www.pcpuzzle.com/forum/viewtopic.php?t=6464
2 versions of popo's Christmas tree
Green foliaged tree with christmas lights
White foliaged tree with christmas lights

Coinquest74m / Liz Mayhew / http://www.pcpuzzle.com/forum/viewtopic ... coin+quest
4 models designed for Minastinroof texture.
A = model1, Popo's waterlily, 1 square
B = model2, black marble pillar
C = model3, pillar with magnolia flowers
D = model4, tree with magnolia flowers

DKgiz07M / DKgiz07 / http://pcpuzzle.com/forum/viewtopic.php?t=4247
1 Model
A = 4x4 floor panel of garden texture grass (deadspot at NE corner)

gardenpack1 / popo & jg *(1) / http://www.pcpuzzle.com/forum/viewtopic.php?t=12520
A = popos fern = Model1
B = jg's tree = Model2
C = jg's white bird = Model3
D = popo water lily = Model4

giverny3 / popo jg & Liz Mayhew*(1) / http://www.pcpuzzle.com/forum/viewtopic.php?t=12601
A = popos fern = Model1
B = teal, 1x5 non-walkable Japanese bridge with dead spot in center
C = willow with water wallpaper (model placed in NW corner) = Model3
D = treebird - tree= Model4

grasspatch / popo / http://pcpuzzle.com/forum/download.php?id=12087 D.D.

irishtree / jg / http://www.pcpuzzle.com/forum/viewtopic.php?t=12139
4 Models
A = Tall clover topped tree = Model1
B= pot o'gold = Model2
C = Rainbow Arch = Model3
D= Green arch = Model4

jgtulips / jg / http://www.pcpuzzle.com/forum/viewtopic.php?t=13238
4 models of taller than Stinky sized Tulips in four vibrant colours

Lillievalley / popo / http://www.pcpuzzle.com/forum/viewtopic.php?t=3316
C = popo's lily pad

lillypud / popo / http://www.pcpuzzle.com/forum/viewtopic.php?t=3444
C = popo's lilly pad

MacNe / jg & popo & Szai14 repacked models / http://www.pcpuzzle.com/forum/viewtopic.php?t=12388
2 Models when used in conjunction appear to be a tall tower see link for details
A = Brick Wall
B = 9x9 "Brick" Box
two plantings (more info to come & copy to Bldg Category)

OhBehave6M / sfseaman / http://www.pcpuzzle.com/forum/viewtopic.php?t=2563
sfseaman's Palm tree

OhBehave16M / http://www.pcpuzzle.com/forum/viewtopic.php?t=3483
4 models
A = Leaves with purple rose
B = Red rose with leaves
C = Vase of pink roses and ribbon
D = 3 purple roses

OhBehave23M / http://www.pcpuzzle.com/forum/viewtopic.php?t=3718
floor tile of Tiger in Jungle
Pillar w/tiger skin
Arch of green jungle leaves

OhBehave29M / http://www.pcpuzzle.com/forum/viewtopic.php?t=4091
4 models of pillars and floor tiles
pillar of yellow daisy on field of pink and white
pillar of Pink with pirple, yellow & green checkered pattern
floor tile pink, yellow and white daisy
floor tile white daisy

palmstatueplant / popo & sfseaman *(1) http://www.pcpuzzle.com/forum/viewtopic.php?t=11973
4 models
sfs Palm Tree
Easter Island Statue facing East
Easter Island Statue facing West
popos Fern Plant

palmwithstatue / popo & sfseaman *(1)/ http://www.pcpuzzle.com/forum/viewtopic.php?t=11838
4 Models
A= Easter Island Statue facing forward = Model 1
B= Easter Island Statue facing east = Model 2
C= Easter Island Statue facing west= Model 3
D= Palm Tree (checking for accurate orientations) = Model4

popo3dbushes / popo / http://www.pcpuzzle.com/forum/viewtopic.php?t=1482
3 models of bright green "popoiary" bushes
A = medium ht. spade shaped topiary plant in pot = Model1
B = tall spade shaped topiary tree suitable for fence/tree line = Model2
C = tall triple-sphered topiary tree = Model3.

popoplants1 / popo / http://www.pcpuzzle.com/forum/viewtopic.php?t=1351
4 models: large fern / potted plant (for top of wall placement) / water lily / small potted plant & read-me file

sfsPalmTree1 / sfseaman / http://www.pcpuzzle.com/forum/viewtopic.php?t=1233 Don't know what happened there - models might need to be uploaded again by sfseaman - or use the zip in the Lichi level. (quote by M.S. at link site) = sfsbeach1 model @ http://www.pcpuzzle.com/forum/viewtopic.php?t=1240
Steve included a separate "readme" download file for this model. Please refer to that file for all details concerning the models in this pack.
4 versions(orientations) of palm tree. (editors note: awesome looking palm tree)

spring / cat / http://www.pcpuzzle.com/forum/viewtopic.php?t=7836
2 Models of Floor Tiles
yellow flower
small pink flowers

treebird / jg / http://www.pcpuzzle.com/forum/viewtopic.php?t=8658
white bird in a lacy-leafed tree
A = bird / B = Tree

Tut3M / Mette / http://pcpuzzle.com/forum/download.php?id=4854 D.D.
plants

Tut4M / Mette / http://pcpuzzle.com/forum/download.php?id=4868 D.D.
Palm trees (?)

weedy / jg / http://www.pcpuzzle.com/forum/viewtopic.php?t=12765
2 orientations of two strand seaweed which sits below water level.

D.D.=Direct Downloads by Mette
*(1)models repacked by jobec5
** models repacked by Cat
***********************************************************
for a quick link to Custom Content posting of Loirae's RTWA models by popo,
click here: http://www.pcpuzzle.com/forum/viewtopic.php?t=12498
*************************************************************
SIGNS & BILLBOARDS

bowlinglanem / jg / http://www.pcpuzzle.com/forum/viewtopic.php?p=36825
Large building sign for the bowling alley and bar & grill

CATM49 / http://www.pcpuzzle.com/forum/viewtopic.php?t=5889
10 tiles wide sign of "Six Flags over Wonderland"

Celebration / Cat / http://www.pcpuzzle.com/forum/viewtopic.php?t=12582
4 Models of Billboards/signs to announce 3 birthdays & 1 anniversary
A = Happy Anniversary in lavender/blue = Model1
B = Happy Birthday with balloons = Model2
C= Happy Birthday Cake with flowers on the icing = Model3
D = Happy Birthday Hot Air Balloon with two bear passengers = Model4.

convcarm / http://www.pcpuzzle.com/forum/viewtopic ... 3927#33927
4 Models
A = Cow set at an angle facing SW 2x3 approx. = Model1
B = Red diamond-shaped cattle-crossing sign = Model2
C = Cow set at an angle facing NE = Model3
D = Purple car facing forward = Model4

help / http://www.pcpuzzle.com/forum/viewtopic ... 3753#33753
1 Model / A = 6x6 floor panel "HELP" sign with a Rainbow and Stinky and the Gang = Model1

jgpopom1 /jg & popo / http://www.pcpuzzle.com/forum/viewtopic.php?t=2108
A = small pile of wrapped gifts = Model1
B = Easter Island statue facing SE = Model2
C = "Stop Danger"sign = Model3
D = tall Campfire = Model4.

LnSBillboard1 / LinkyNStoof / http://www.pcpuzzle.com/forum/viewtopic.php?t=1335

poposigns / popo / http://www.pcpuzzle.com/forum/viewtopic.php?t=2146

SIGNTEXT / dlcs18 / http://www.pcpuzzle.com/forum/viewtopic.php?t=11048
1 Model / A = approx. 7x5 placard type sign w/pole in center to floor = Model1
dlcs18 says you can change the jpeg to have the text read whatever you wish. See topic for details.

SIGNBUTTEN / Toon Dog / http://www.pcpuzzle.com/forum/viewtopic.php?t=11048
1 Model

Stinkyday / Majic / http://www.pcpuzzle.com/forum/viewtopic.php?t=3103
rainbow Billboard sign "Mushroom Hills"

************************************************************
SPACE ITEMS, CREATURES
alienm / jg / http://www.pcpuzzle.com/forum/viewtopic.php?t=5771
4 models of Stinky-sized green alien facing 4 directions
A = looking south = Model1
B = looking west = Model2
C = looking north = Model3
D = looking east = Model4.

aliens / jg / http://www.pcpuzzle.com/forum/viewtopic.php?t=8102
1 Model of forward facing Marvin the Martian

CATM05 / http://www.pcpuzzle.com/forum/viewtopic.php?t=4147
1 pillar and 3 floor tiles with space theme
Red cosmic pillar
fl. tile of dark aurora effect
Fl tile of a ufo closeup
Fl. tile of space objects against a black background.

clone / jg / http://www.pcpuzzle.com/forum/viewtopic ... 5832#75832
"weird machine" quote by Janet ( could also be used as a large pink "way-back" machine or extruder or transportation device)

dome / jg / http://www.pcpuzzle.com/forum/viewtopic ... 6115#76115
A = Metallic space dome approx 6x6
B = 2x1 blue hovercar
C = wingless metallic and green space vehicle
D = large Black x-wing type vehicle

floating sphere / / http://www.pcpuzzle.com/forum/viewtopic.php?t=11758
3 models of a large sphere situated at different elevations in relation to the floor surface ?("Gnarled"-like texture)
A= sphere at floor level
B= sphere at just below floor level
C= sphere above floor level

JEFFH7M / http://www.pcpuzzle.com/forum/viewtopic.php?t=5483
From Jeff's Adv7-Pt1 includes 3 models
Rocketship whose base sits just below floor level and is at a trajectory angle.(Blue/Green w/trim)
Mothership Casino Sign
7x7 Pink and Blue UFO

JEFFH6M / http://www.pcpuzzle.com/forum/viewtopic.php?t=5368
From Jeff's Adventure 6 this model pack includes 3 models
(Huge Z-bot)
A
C
D

JEFFH9M /

labjar / jg / http://www.pcpuzzle.com/forum/viewtopic.php?p=73735
A = tall eerily green cylinder apparatus
B = alien

Lunarlandscapem / popo & JeffH & Liz Mayhew / http://www.pcpuzzle.com/forum/viewtopic.php?t =5888
A = grey volcano with blue lava (adaptation of "Popo's marvellous volcano") = Model1
B = rocket model (by Jeff) = Model2

Marvin / jg / http://www.pcpuzzle.com/forum/viewtopic.php?t=7530
A = Marvin the martian is 1-1/2 x Stinky height

maxem / jg / RESEARCHING
alien ? (haystack looking walkable thing)

mod / Kaboom / http://www.pcpuzzle.com/forum/viewtopic.php?t=2151
Model of a Poster "Genesis Unveiled" by Greg Martin. Dark, nebulous space with a Saturn-like planet at left and smaller planets or planetoids in various positions. A large glow of light emanates at the center of this poster. Place model in center top or in upper right corner of level field.
Covers approx. area of 14x20.

Temple300Eyes / Liz Mayhew / http://www.pcpuzzle.com/forum/viewtopic ... +looks+key
A = model1, space gate, 3 squares left-right, dead spot at left
B = model2, floor panel 3 x 3 squares, dead spot top right
C = model3, floor tile fragment of panel, 1 square, dead spot above
D = model4, floor tile eye-key, 1 square, dead spot above

Spacegate / / http://www.pcpuzzle.com/forum/viewtopic.php?t=9364
2 models of Black & Red tube-like gates / A = facing forward / B = side view

spacesoko / popo / http://www.pcpuzzle.com/forum/viewtopic.php?t=2898

ufoboomtownm / Shorty / http://www.pcpuzzle.com/forum/viewtopic.php?t=3918
8x8 floor tile w/ufos on Spooky Textures yellow/black grid lines

ufotest/ jg / http://www.pcpuzzle.com/forum/viewtopic.php?t=11935
3 models (approx. 8 x 8 coverage) of a mothership situated at different elevations in relation to the floor surface.
A= floor level = Model1
B= above floor level = Model2
C= below floor level = Model3

wonderwars1m / loof101 / http://www.pcpuzzle.com/forum/viewtopic.php?t=9716
Red "Viper"-like space vehicle (3 rear thrusters and pointed nose cone)

********************************************************
STAGE SETTINGS (also see Locales category)

cloudm/ loof101 / http://pcpuzzle.com/forum/viewtopic.php?t=8113
walkable floortile _ x _ LOOKS LIKE SNOW and has been used that way

Coinquest18m / Liz Mayhew / http://www.pcpuzzle.com/forum/viewtopic ... coin+quest
2 models.
A = model1, a huge volcanic background stretching below the entire level. dead spot top left.
B = model2, a pop-up picture of the Ufog monster.

Coinquest48m / Popo and Liz Mayhew / http://www.pcpuzzle.com/forum/viewtopic ... coin+quest
This set features a screen model made for me by Popo. Any picture can be put on the model. Also a fabulous Wizard's Tower, also made by Popo
4 models. Pictures can be replaced with any pictures.
A = model1, screen picture, 4 squares left-right, 4 squares high, dead spot at 3rd square. B = model2, C = model3 (both as for model1).
D = model4, a huge Wizard's Tower 6 x 6 and very high, dead spot top left.

hobbit03m / loof101 / http://www.pcpuzzle.com/forum/viewtopic.php?t=8627
2 models using same brown texturing
A= 9x9 mountain with trail marks
B = Screen "Wow, is this the Mountain?"

islandm / jg / http://www.pcpuzzle.com/forum/viewtopic.php?t=3929

JEFFHx3M / http://www.pcpuzzle.com/forum/viewtopic.php?t=6201
from Jeff's Pirate Stinky Adventure this model pack includes 4 Models
Sunken Ship with mast
Skeleton / survivor sign / tripod / torch?
Shark facing forward balanced on his tail
Telescope?

jgozm / jg / http://www.pcpuzzle.com/forum/viewtopic ... 3065#33065
2 Models
A = Tornado model (editors note.: must see) = model1
B = Floor panel - circular pattern matching size of largest part of tornado
on light green field = model2

jobecbridge / popo / http://www.pcpuzzle.com/forum/viewtopic.php?t=12525
2 Models of teal-colored, non walkable, Japanese Bridge 1x5 with dead spot in center
A = North-South orientation = Model1
B = East-West orientation = Model2

LnSLibertyXTGM / LnS / http://www.pcpuzzle.com/forum/viewtopic.php?t=1193
StatueofLiberty

Lunarlandscapem / Liz Mayhew's adaptation of popo's volcano model
A = grey volcano w./blue lava = Model1
B = rocket model (by Jeff) = Model2

mod / Kaboom ? / http://www.pcpuzzle.com/forum/viewtopic.php?t=2151
I don't know if Kaboom actually made mod or not.
model of bkg
Genesis bkg appears as a dark and nebulous sky , model to be placed in nw corner
this bkg/model will cover an approximate area of 14x20 or a bit greater.

NewYorkM / LnS & Shorty / http://www.pcpuzzle.com/forum/viewtopic.php?t=3862
4 Models
A = Statue of Liberty
3 Floor Panels:
B = State Bird
C = Big Apple w/Skyscrapers
D = Hunky male model

operam / jg / http://www.pcpuzzle.com/forum/viewtopic ... 8966#78966
opera singer and stage/curtains

Peeguespile / popo / http://www.pcpuzzle.com/forum/viewtopic.php?t=7008
For use with 3D levels. Brick house ModelA includes interior decorating: fireplace, wallpaper, painting, carpeting.
Exterior has an awesome view of a mountain with a lake at its base. Even if you dont play the level, its a nice spot to visit.

popo3dmnply / popo / http://www.pcpuzzle.com/forum/viewtopic.php?t=1410
Chance Cards / Community Chest / A "Go to" Jail cage / Monopoly Board

ribs / jg / http://www.pcpuzzle.com/forum/viewtopic.php?p=80147
2 dinosaurs
2 cavemen/women
set of bones
ribcage

sfsbeach / sfseaman / http://www.pcpuzzle.com/forum/viewtopic.php?t=14200
Palmtree
tent
turtle

sfsfog / sfseaman / http://www.pcpuzzle.com/forum/viewtopic.php?t=1532
Cloaking floor panel which actually looks like a snowy field with the drifts in varying heights. covering a 12 x12 area
place A model at southwest corner

Shoremodel / sfseaman / combines elements from Palm tree and tent model packs found elseewhere herein

snakesnladders / popo / http://www.pcpuzzle.com/forum/viewtopic ... 2641#12641
Model includes the board for the snakes and ladders game approx 14x14 or 16x16

Stonehenge / popo / http://www.pcpuzzle.com/forum/viewtopic.php?t=3924
very large grouping of walkable brown stones closely resembling the original.

SUN / jg / http://www.pcpuzzle.com/forum/viewtopic.php?t=10679
A =striking model of the sun sits high above the floor level = Model1

sword / jg / http://www.pcpuzzle.com/forum/viewtopic.php?t=11327
1 Model / A= Gold Excaliber type sword pointing down.

townpack / jg & popo ** / http://www.pcpuzzle.com/forum/viewtopic.php?t=12308
4 Models
A = Large Waterfall with rocks, dead spot at NW corner of 5x3 area = Model1
B = Wizard same height as Stinky w/purple robe, rainbow wand & conical hat = Model2
C = popos large Fern Plant = Model3
D = jg's Lacy foliaged treebird (w/o bird) = Model4.

Volcano / popo / http://www.pcpuzzle.com/forum/viewtopic.php?t=5405

Volcano2 / popo * / http://www.pcpuzzle.com/forum/viewtopic.php?t=7449
3 Models
Volcano
Igloo
Iceland flag?

volcanic / listed Oct-Nov 2005

willowbkgm / Liz Mayhew / http://www.pcpuzzle.com/forum/viewtopic.php?t=12619
2 models of wallpaper like background with willow trees as the theme
A = Willow Tree and Sky = Model1
B = Willow Tree and Water = Model2

Waterfallm / jg / http://www.pcpuzzle.com/forum/viewtopic.php?t=11978
1 model
A= Waterfall with rocks and pool at base. deadspot at nw corner, size 5x3

waterfallm2 / jg / http://www.pcpuzzle.com/forum/viewtopic.php?t=11978
1 model
A = narrow stream waterfall with pool and bubbles at base. 3 x 2 tile area.

* Loof101 repacked models
**jobec5 repacked models
**********************************************************
ST. PATRICK'S DAY ITEMS

irishtree / jg / http://www.pcpuzzle.com/forum/viewtopic.php?t=12139
4 Models
A = Tall clover topped tree = Model1
B = pot o'gold = Model2
C = Rainbow Arch = Model3
D = Green arch = Model4

jglookingm / jg / http://www.pcpuzzle.com/forum/viewtopic.php?p=25384
2 models
A = 3x3 floor panel of Leprechaun with a pot of gold
B = 3x3 floor panel of a pot of gold

jgmarch17 / jg / http://www.pcpuzzle.com/forum/viewtopic.php?p=25384
St Paddys Day models

jgstpatm / jg / http://www.pcpuzzle.com/forum/viewtopic.php?p=25384
Floor panel of Our Patrick, "cleverly" disguised for a St.Paddys Tribute
(an old american tv show called the Gong show used this disguise for the unknown comic)

rmtile2 / rmelin / http://www.pcpuzzle.com/forum/viewtopic.php?t=2295
4 Models of floor tiles
A = Knight & dragon on teal bkg
B = Green Clover leaf
C = white cat face
D = golden dragon on white bkg
********************************************************
THANKSGIVING AND FALL ITEMS
see Halloween Category for seasonal items and colors

CATM51 / http://www.pcpuzzle.com/forum/viewtopic.php?t=5974
Floor tile of Wonderland Gang
Floor Tile of Dinner plate with Thanksgiving Turkey & dressing
jg Turkey model
Floor tile of turkey next to corn stalk with pumplin and gourd.

CATM53 /

CATM62 / http://www.pcpuzzle.com/forum/viewtopic.php?t=6106
Floor tile with greeting "Happy Thanksgiving" & turkey
jg mailbox
********************************************************
VALENTINES DAY ITEMS

CATM13/cat/ http://www.pcpuzzle.com/forum/viewtopic.php?t=4920
3 Models of Floor Tiles
Chocolate candy bars and a lollipop and a M&M dispenser. Chocolate house!
Chocolate candy bars,lollipops, candy canes another chocolate house.
White pony, candy cane on it's back side, peppermint mane and tail!

CATM29 / http://www.pcpuzzle.com/forum/viewtopic.php?t=5504
3 Models of
A = 3x3 Floor panel lilac Welcome (door)mat = Model1
B = 2x2 Floor panel light purple heart = Model2
C = Pillar with skin texture of United States Flag and red hearts = Model3
*********************************************************
VEHICLES

bat1 / jg / http://www.pcpuzzle.com/forum/viewtopic.php?p=61149
A = batman car, wonderland style

batsaucer / jg / http://www.pcpuzzle.com/forum/viewtopic.php?t=6263
2 models of a black-domed ufo
A = gray viewport at front
B = with the Batman silhouette (logo) at front
**
bigape/ jg / http://www.pcpuzzle.com/forum/viewtopic.php?t=8564
3 Models
A = King Kong = Model1
B = Empire State Building = Model2
C= Red Truck = Model3

bigtruck / jg / http://www.pcpuzzle.com/forum/viewtopic.php?p=78901
A = a Semi-(tractor-trailer) truck

CARSHOWIXWSLX /Midnight Synergy by Psionic / http://www.pcpuzzle.com/forum/viewtopic.php?t=1074
for test level to view ferrari models with Stinky click here
http://www.pcpuzzle.com/forum/viewtopic.php?t=1075
4 Models of Ferrari autos which are size appropriate to Stinky and Friends
A = "Qookie" Red = Model1
B = Lemon Yellow = Model2
C =Spring Green = Model3
D =Gunmetal Grey with Rainbow detailing = Model4

convcarm / jg / http://www.pcpuzzle.com/forum/viewtopic ... 3927#33927
4 Models
A = Cow set at an angle facing SW 2x3 approx. = Model1
B = Red diamond-shaped cattle-crossing sign = Model2
C = Cow set at an angle facing NE = Model3
D = Purple car facing forward = Model4

f360ZUTJRE / Psionic & MS & Clifford / http://www.pcpuzzle.com/forum/viewtopic.php?t=10943
D = Spring Green ferrari

GTA8 / Liz Mayhew / http://www.pcpuzzle.com/forum/viewtopic ... light=gta8
Three models to go with the Grand Theft Auto series.
B = model2, yellow car facing left, 5x3 squares, dead spot centre.
C = model3, pop-up sign, 1 square.
D = model4, pop-up sign, 1 square.

GTAm / Liz Mayhew / http://www.pcpuzzle.com/forum/viewtopic.php?t=3327
3 Models
A =Red Sports Car = Model1 facing right
B= Silver Convertible = Model2 angled nw to se
D = Grey Ferrari w/ Rainbow trim = Model4 facing forward

jgfindpeegueM / jg / http://www.pcpuzzle.com/forum/viewtopic.php?t=1332
1 Cage model & 3 car Models
A = black Cop Car
B = Red Car (ferrari?)
C = Gray 3x2 Cage (dead spot left)
D = Gray Car (popo's audi?)w/rainbow dec.

LIMO / popo / http://www.pcpuzzle.com/forum/download.php?id=6956 *
2 Models of a white stretch limo 8x3
A = N/S orientation
B = E/W orientation

Mette45m / MS by Psionic / http://www.pcpuzzle.com/forum/viewtopic.php?id=6273 *
cars

Mette50m / MidnightSynergy by Psionic / http://www.pcpuzzle.com/forum/viewtopic.php?id=6868 *
car

nautilus / Kaboom / http://www.pcpuzzle.com/forum/viewtopic.php?t=1355
1 Model / 20,000 Leagues Under the Sea submarine 20x3 goes below (floor) water level

OhBehave11m / http://www.pcpuzzle.com/forum/viewtopic.php?t=3183
4 model, 1 pillar & 3 cars MS by Psionic
A = pillar with yellow/white line pattern
B = Yellow car
C = Green car
D = Gray car w / Rainbow on roof

plane2 / jg / http://www.pcpuzzle.com/forum/viewtopic.php?t=6262
batplane faces different directions

popo3daudi / popo / http://www.pcpuzzle.com/forum/viewtopic.php?t=1285

popo3djeep / popo / http://www.pcpuzzle.com/forum/viewtopic.php?t=1248
pack has multiple positions for two styles of army jeeps

popom1cop / popo / http://www.pcpuzzle.com/forum/viewtopic.php?t=1294
according to popo a cr**py cop car.
A = Black model of a cop car

popowindfall1 / popo / http://www.pcpuzzle.com/forum/viewtopic.php?t=1282
2 models whose links can currently be found in the catalog as noted / Audi = 3entries above / Swimmingpool = Home & Garden category as popo3dswpl
A = swimming pool with dead spot at SE corner of 5x6 coverage area
B = Audi angled to face SW
**
railwaymod / location of this model may change after research

D.D.* = Direct Downloads by Mette
***********************************************************
WONDERLAND GAME-LIKE ELEMENTS, TILES & OBJECTS

2tinybox / Toon Dog / http://www.pcpuzzle.com/forum/viewtopic.php?t=10932

2tinybox2 / dlcs18 / http://www.pcpuzzle.com/forum/viewtopic.php?t=10932
Rainbow Marble look

a / jg / http://www.pcpuzzle.com/forum/viewtopic.php?t=7597
2 Models when used in conjunction appear to be a tall tower see link for details
A = Brick Wall
B = 9x9 "Brick" Box

BMadness10m / Shorty / http://www.pcpuzzle.com/forum/viewtopic.php?t=4358
4 Models (Take a peek at this level if you havent played it yet..
This level is a wonderful example of Shorty's artistic skills.
Dont miss the house in the NE corner of the level). editor note
A = Variegated pepperminty textured Arches oriented E/W = Model1
B = Blue frosting cupcakes Arches on a pink field oriented N/S = Model2
C = Floor tile of a party-hatted cartoon boy = Model3
D = Floor tile of confetti & stars on a red field = Model4

chocbuttons / Lillie / http://www.pcpuzzle.com/forum/viewtopic.php?t=10898

CHOMPERIFIC / jg & Shorty / http://www.pcpuzzle.com/forum/viewtopic.php?t=3194
2 Models
A = ogbd model Screen of yellow and red chompers heads = Model1
B = jgcats model of background type model of variety of sizes of cartoon cats = Model2

Coffeeandcream / Lillie / http://pcpuzzle.com/forum/viewtopic.php?p=31288
A = Floor tile of cream-colored classic square design with center motif accented by coffee-colored line work

fakefakewalls / http://www.pcpuzzle.com/forum/viewtopic.php?t=8045 ?

floors / popo / http://pcpuzzle.com/forum/viewtopic.php?p=13462#13462

GameElements06 / http://www.pcpuzzle.com/forum/viewtopic.php?t=3113

generator / loof101 / http://www.pcpuzzle.com/forum/viewtopic.php?t=8045

generator2 / jg / http://www.pcpuzzle.com/forum/viewtopic.php?t=8045

GE06Arch01 / Kazza / http://pcpuzzle.com/forum/viewtopic.php?p=32190
Robbies Arch with garden texture oriented East/West

giantb / dlcs18 / http://www.pcpuzzle.com/forum/viewtopic.php?t=10143
1 Model
A = giant boulder = Model1

help / jg / http://www.pcpuzzle.com/forum/viewtopic ... 3753#33753
1 Model / A = 6x6 "HELP" Sign with a Rainbow and Stinky and the Gang

HullabalooM / Lillian / http://www.pcpuzzle.com/forum/viewtopic.php?t=3402
1 Model / A = floor tile of blue with squared spiral design.
**
mascaradem / jg / http://www.pcpuzzle.com/forum/viewtopic.php?t=2405
(when you reach the link page -- scroll down page a bit to jg's section)
2 Models
A = 6x6 Floor tile of female Superhero
B = mascarading teleporters (star) as floor tiles with spooky texture fl.tiles

Mette32m - floor model http://pcpuzzle.com/forum/download.php?id=5338

objects / jg / http://www.pcpuzzle.com/forum/viewtopic.php?p=61773
Models: rainbow coin / bonus coin / exit

raceto100 http://www.pcpuzzle.com/forum/viewtopic ... 3648#33648
2 - "cloaking" *floor panels (14x14?) in pastel green and pink (?) with
numbers: 10's...20's- 90's
dotted intermittantly throughout the panels

Scotland http://www.pcpuzzle.com/forum/viewtopic.php?t=3434
4 Models
A,B & C = Floor tiles of Blue & Green w/black,& red tartan plaids = Model1-3
D = Screen of recipe for Haggis = Model4

Screen Models vers.1b listed March-April 2005
Screen Models vers.2 listed March-April 2005

sfsstrange / sfseaman / http://www.pcpuzzle.com/forum/viewtopic.php?t=1480
mascarading Teleporters (star) as floor tile in the castle texture floor tile with grate

telebox / mqdar / http://www.pcpuzzle.com/forum/viewtopic.php?t=13035
4 models of 1 wall-sized box with gift wrapped look to it
A = yellow box with red trimmings = model1
B = green box with blue trimmings = model2
C = walkable model1 = model3
D = walkable model2 = model4

Tut5M - some floor texture models (for visual effect) http://pcpuzzle.com/forum/download.php?id=4915

Tut6M - another floor model (to cover something up, I think) http://pcpuzzle.com/forum/download.php?id=4924

Tut7M - some other floor models (to cover something up) http://pcpuzzle.com/forum/download.php?id=4982

Vhighwall / mqdar / http://www.pcpuzzle.com/forum/viewtopic.php?t=12685
4 Fantastic models of higher walls using the Lush texture
A = 2.5 high
B= 3 high
C = 3.5 High
D = 4.0 High

*"cloaking" panel hides game elements (for example: conveyors) beneath it.
*************
END VOLUME 3
*************

Volume I http://www.pcpuzzle.com/forum/viewtopic.php?t=12302
Volume II http://www.pcpuzzle.com/forum/viewtopic.php?t=12638

***************************************************
MISCELLANEOUS ITEMS SEARCH
This is an updated version 5/24
I would appreciate any help to finish this up.
IF YOU HAVE ANY INFORMATION ON THE "ORPHAN" MODELS below please post here or pm me.

Just to recap, this is the format:
Model Name / Modelmaker(s) and/or (*repackers) / link (http://www....)
but if you cannot locate the links, please share any data you may have:

billboards1/ listed prior to Jan 05

buttons / listed June-July 2005

C01

city / szai14*(please find these levels and let me know what the models are) - - T111.LV6 - T115.LV6

city / wonderland01*(ANY IDEAS ON THIS WL01?) - what models were in this model pack please- BE76.LV6 - BE80.LV6

dgm1m*(DISCGOLFER?) / listed May-June 2005

dgm2m / listed May-June 2005

dgm3m / listed May-June 2005

DGSARCHES / listed May-June 2005

DutchBeach

Easypeezm / listed June-July 2005

eggs5 / jg*

Europe1 / listed May-June 2005

explorespacem

friends / listed June-July 2005

ghostie / popo / Ghostie is a giant RTW ghost that popo made for someone for a level contest (perhaps you?-- if so please step up and tell me where this model pack can be located or the name of the level or which contest and year it was used in (halloween?)

Guy / listed March-April 2006

hallomod / listed Oct-Nov 2006

halloween / Cat ? / listed Oct-Nov 2005

halloweenm / Cat ? / listed Oct-Nov 2006

hazwaste / listed Dec 06-Jan 07 - I will check the Dec'06 archives for this

heat1 / listed May-Jun 2005

Ikkus / listed Aug-Sept 2005

Jaws /

jazz / listed May-Jun 2005

JC133m * (JCVALCAR??)I am sending pm's or emails out to the modelmakers or presumed modelmakers. Will try to compile a complete list before sending questions to all of you.
JCM55 /JCM 56 / JCM57 / JCM58 / JCM60 / JCM62
Karaokenights / listed june-july 2005

KeekarooM / listed Aug-Sept 2005

krazym /

Lamps / jg / listed Oct-Nov 06 / 3 models Crypt / Lamps &
PROBLEM(s): post only links to associated site because this was used in the Halloween contest in 2006. Can this model pack be reposted into Custom Content proper?
Lilac / listed June-July 2005

LnSBackground1 / LnS / listed Aug-Sept 2005

lovem / listed Jan-Feb 2006

lstlev13m / listed Oct-Nov 2005

mahaloof / Mahaloof / mahaloof MAHALOOF.LV6

maitai / listed Nov-Dec05

maypole / listed May-June 06

mush / listed May-Jun 2005
mushroom (I may have this but I need to check my paper copies of data sent)

neon

olympic04 / listed prior to Jan 05

partay / listed Nov-Dec 06

party / listed Oct-Nov 06

PassionCoveM / listed June-July 2005

pillartex / listed Feb-Mar 2006

poolm listed June-July 2006

RMarch / listed Mar-Apr 05

railwaymod

space / listed June-July 05

spookystreet

sporeprints / listed May-Jun05

strawberry / listed Nov-Dec05

teenytwittyxmas / listed Nov-Dec 05

teethm /

tictactoem /

volcanic

*repacker - refers to forum member who "mix-mastered" original models which came to us originally by other forum members. It has come to my attention that when so doing, the repacker always runs the risk of omitting jpegs and possibly other vital information which may be necessary to keep the models in their original condition.
Because this has happened, I personally am trying to come up with a solution to this which will perhaps take the form of a 2nd party doing a level test containing the re-packed models. The Forum level tester should take special care to note that all jpegs are included in the folders provided.
Caveat: Sometimes a skin may be left off due to a specific purpose by the repacker for his/her custom level. And in general, Arches, columns and floors tiles, Screens and Billboards are constantly receiving a new face-lift with unique new skins for specific purposes.

Well all those beginning with jg are janetgalle's, all those beginning with sfs are sfseaman's, and one of, if not both, of his beach models had a turtle in it too.

Snakesnladders I made. It's a floor model with a snakes and ladders board on it. About 14x14 or 16x16 something like that, can't quite remember. Link is here http://www.pcpuzzle.com/forum/viewtopic ... 2641#12641

I noticed that there was still a wonky level in that thread so I have deleted the wonky one and the correct one is further down the page.

The MADbonfire I think I made. It's a model of a bonfire obviously that takes up just over a tile. Don't have the link for that cos I didn't post it, it was in with a Guy Fawkes level.

Those two links you posted up above won't work cos they don't have the numbers at the end.

Thats right Pauline

I have no information and am seeking same on all that have no link beside the model name

Thanks for the 2 which I have editted to date. and I will do a search for the Guy Fawkes level asap.
Also appreciate data on Steves models as his forum status appears to be inactive.

Sorry for the lag time. I had to get out and do some gardening. Beautiful day here, wish I could send some sunshine out to everyone

B

Hope this helps. I do not have the links to posts. The names are those of the level maker. Except for sfsfog by sfseaman, up to May 17, 2005 the name I listed was the only person having used the level. So it is a fair assumption that they created, or mixmastered, the level also.

I can fill in more of the level and by whom data you are missing in the two catalogs. But it seems you do want the post data, which I do not have. When I have more time, I will try searching and see if I can find more for your catalog.

Please make Catalog II Sticky.

Ms Holly Belle
~~~

RBIntrol1 INTROTEST3.LV5, ADVLANDDELUXE2.LV5 BY Loof101
INTROTEST.LV5 by LinkyNStoof
RBIntro1bugs INTROTEST2.LV5 by janetgalle
There were posts as to the original one having problems and LinkyNStoof fixing it and etc. I don't remember the exact details....

Thank you Ms HollyBelle

This will be very helpful I am sure. I appreciate all the time it took for you to compile this information for the catalog.


PS (As to making Volume II sticky, I will add more links into the Main Volume and Vol.II so that you can link back and forth more quickly)

It is my hope that the fully compiled & editted Volumes I & II will be released here in June. This third portion I am hoping to use for overflow, BRAND NEW MODELS and other information as it becomes available.

MsHollyBelle wrote:loofland is a House used in KIDSBLADERLOOF.LV5 by little jg. Thus it would be janetgalle?

Actually, that was a house I made. lol

Thanks Loof101,

It appears that this item was mistakenly placed in the Custom Models list at Mette's site. I will let her know.

I appreciate your quick response.

Becky

BTW, I found the link to your hobbit01m at topic#8403 and the links to the other two were supplied herein. Per my pm to you, when you get some free time, please supply descriptions of each of the models within these 3 model packs. Thanks!

EDIT
Here are your other links in case you did not get a chance to write them down before I removed them on Saturday 4/28 from the list above.

hobbit01m / loof101 / http://www.pcpuzzle.com/forum/viewtopic.php?t=8403 (I have asked Loof101 to supply the descriptions for these 3)

hobbit03m / loof101 / http://www.pcpuzzle.com/forum/viewtopic.php?t=8627

hobbit04m / loof101 / http://www.pcpuzzle.com/forum/viewtopic.php?t=8692

OK jobec, I'll give it a go!

Here's the link to the original posting of popo3drudolph. There's a readme in the folder.
http://www.pcpuzzle.com/forum/viewtopic ... 1616#11616

Here's the one for popo3dxmas http://www.pcpuzzle.com/forum/viewtopic ... 4152#14152
There's a readme in here too. There should only be 3 model files in the folder, but there are four. It seems Rudolph sneaked in there while I wasn't looking. He's model4.

Popowindfall, I have down as popowindfall1 and the link is here http://www.pcpuzzle.com/forum/viewtopic ... 1224#11224 It contains the audi and swimming pool models that you may have got down seperately. No read me as they were part of a level.

Egypt was for a level made by Lillie - or Lillian at the time I think - it contains model1-large pyramid, model2-skeleton-no texture for this(made by jg I think), model3-Tut's mask, model4-signpost with camel. I made the other 3 models with the textures. No readme as it was for a level, and I don't have the link for it either.

Willie was made for jcvalcar2's Willie Winky level. It contains model1-large suspended sunclock, model2-alarm clock with face, model3-giant padlock, and model4-double 4 poster bed. No link for this one either.

Toybox was another one for Lillie. Model1-giant Stinky head(by sfseaman), model2-jack in the box, model3-giant gumball machine, model4-group of balloons. No link for this on either.

Ghostie is a giant RTW ghost that I made for someone for a level contest. Don't have the link.

Kidsfunm contains a slide and a train that I posted as a group of toys. It also contains a jpg that shouldn't be there, I think it should be a wood texture, and not named model1.jpg. I don't think it would show up right in the level. Sometimes when people use models from another folder they forget to copy the jpgs over and the model gets corrupted. The slide model was originally posted as popo3dslide and the train as popokidstrain.
EDIT. Forgot to add the link for the slide and train. http://www.pcpuzzle.com/forum/viewtopic ... 2051#12051

To keep the catalogue cleaner, if models are being posted twice, I would only post the original one in the catalogue, because as I said above, some models are getting corrupted as they move around. It's not good to have corrupted models in the catalogue.

Would you like me to find/post the level threads on the Egypt and Toybox levels? Would that help?

You are doing a grand job Becky!

Thank you Lillie
That would be a help. BTW I sent you a pm.

Becky

Here is the Toybox model zip file - I found it from the Kids Competition entry post! I am still searching for that Egypt level (between trying to make dinner!) - will get back to you on that one!

Here is the Egypt zip file!

Thanks so much Lillie

I had some major family issues today

But I will post these immediately

Thanks hun

Always
Becky

To keep the catalogue cleaner, if models are being posted twice, I would only post the original one in the catalogue, because as I said above, some models are getting corrupted as they move around. It's not good to have corrupted models in the catalogue.
_________________
Pauline




Pauline,

I would appreciate a clarification of this as I am only compiling data for the catalog, I am not changing model files.

Levelmakers (myself included) have taken models out of their original pack and, as we have been encouraged to do, used them in a mix and match fashion.

Personally, for the huge number of models here, I have only spotted a few which might be considered "corrupted".

So please clarify what it is you are saying here as it would be a shame if people were afraid to use the catalog because of a misunderstanding

Thank you
Becky

I mean when people take one model out of a model pack to use in another one and either don't take all the relevant jpgs or change a jpg that shouldn't be changed. The model then ends up 'corrupted' for want of a better word.

Let me try and explain how it works.

When I make a model I can either colour it in the program so it doesn't need a jpg, or I can texture it so it does need one or more jpgs, or I can do a mixture of both.

If the model is textured and has just one jpg then it can be named model#.jpg or the original texture name eg. wood.jpg and it will show up fine either way.

If the model is a mixture of colour and texture then the jpg/jpgs have to keep the original names because if you change them to model#.jpg all of the model gets coloured with it. Not textured note, but coloured with the predominent colour in the jpg.

The example I gave you of the playground slide would show what I meant. It originally had a wood.jpg texture for part of it and colour for the rest. In one of the links you gave to that model that someone else had altered the wood.jpg texture was replaced by a skin coloured model#.jpg. Therefore the whole of the model would become skin coloured. This might be what the person intended it to look like or they might have thought only the wood part would be changed, but as they don't know what they are doing they end up with a model which is messed up.

What I was complaining about is that these models might end up linked to me as the maker when I didn't do it to them. Certain models can have things changed by someone else and it's ok, custom floors for instance, are made to have different jpgs put on them. Most models on the other hand have the textures assigned while being made and they should stay that way, or the maker should be asked to assign a different texture.

You wouldn't buy a car and then start taking bits out of the engine and replacing them with Lord knows what would you? So models, on the whole, unless otherwise stated should be left the way they are intended.

I'm not complaining of model packs being split as long as they are split correctly. Is that clear enough for you?

Popo you said:
Is that clear enough for you?

I got the gist of it before, but I thought that perhaps there might have been some confusion for newer people who may be unfamiliar with custom models, etc and how they work or dont work.

Regarding the duplicate entry for floors, It was listed twice on Mettes site: once in the group which had been made prior to January 20th 2005 and a second time in the group which were listed from April 19th 2005 to May 18th 2005.

I was also given information, apparently incorrectly, My apologies Pauline, as to another Modelmaker. (to whom I thought the duplicate model name might be attributed. )

Becky

Apologies accepted but not necessary, I just wanted to clear it up.

Can I take it then that you don't actually check what's in the folders that the links point to? I ask because, like I said before, I can't see the point of having two different links to the self same model. For one thing it makes the catalogue bigger than necessary. The other reason is that if you don't check then you could be pointing someone to an above described 'corrupted' model when they should be directed to the proper one.

This would be a lot of extra work for you, which is why I was pointing it out when it was one of my models. I can give you the links for all the models I have ever posted if you can give me half a day to sort it out. I just want to help you make the catalogue as clean as possible.

Here's something else that's wrong.

Kazza80M / popo (appears to be dupl. of popoplants1 model pack./
http://www.pcpuzzle.com/forum/viewtopic.php?t=3421(highlight item in red?)
Because the folder to this model is not the same name as the
model folder within it, the models do not show up.)
Suggestion: use popoplants1 link: http://www.pcpuzzle.com/forum/viewtopic.php?t=1357

The top link works fine, I tried it, and yes it is a duplicate of the plants pack. The bottom link is for a level by Kaboom, no model files there.

Perhaps the model file< bearing the name of Kazza80M >at Mettes site should be changed also?

BTW the typo for the popoplants1 link has been corrected.

<editted>

I've never actually been on Mette's site to download any models so I don't really know what's up there, but I suppose if she has every model ever posted on there then there are bound to be some 'bad uns' amongst them. Without going through them all I wouldn't know which ones weren't right.

EDIT.
Just been for a look on Mette's site. There are loads of duplicated files on there and what's confusing is that the headings say all models made from # to # when it should really say all models posted from # to #. The duplicates are from when someone makes a level and posts the attachment for the model pack used instead of a link. Mette must just upload whatever's there without checking if it's already up there.

If you're using her site as a basis for the catalogue then it will be very confusing for you.

Good Day to you Pauline

Clerical work is never easy at best. Back in 2004 there were fewer custom items to deal with but I think that Mettes site was and remains a valuable resource for many forum members. It all depends upon your viewpoint I guess. Now at my age I dont have to work outside of my home, but many others do and that takes a lot of time and energy.

I do apologize for any misunderstanding which may have arisen on my part due to lack of critical knowledge or other things.

So now that the Kazza80M model name only exists off-forum, I can safely delete it from this catalog now to alleviate any further confusion.

You also said earlier:
"Can I take it then that you don't actually check what's in the folders that the links point to"

Actually Pauline I do try to look at whatever I can. When I first started the catalog I knew there would be inconsistancies and errors but as I stated also, I believe that these things will all get smoothed out in some fashion over the course of time. We have enough room at this point to leave most of the repacked models in for now. I know, for example that at least one of the ones I repacked has been used as it is. I am trying to generate a list to send you via pm of your models that I need assistance on . But for the most part, your model names tend to be very informative and the read-me files invaluable.

Hope this clears it up.

Have a Wonderful Day
Always
Becky

Hope you all can make good use of the catalog and find it to be user friendly. I did the best I could with the tools that I had. And many thanks to all of you kind folks who helped to make it more complete.

Modelmakers who voluntarily sent everything needed, many many thanks.
Good luck and God Bless

Respectfully
Becky